Konica Minolta magicolor 7450 II grafx magicolor 7450 II Reference Guide - Page 207
Setting the Address Manually
View all Konica Minolta magicolor 7450 II grafx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 207 highlights
Setting the Address Manually You may also manually change the printer's IP address, subnet mask, and gateway by using the following instructions. (See chapter 6, "Understanding the Ethernet Configuration Menus," for more information.) " When manually setting the IP address, turn off DHCP and BOOTP first. In addition, when the IP address is changed, add a new port or reinstall the printer driver. If the control panel is used to change the IP address, the DHCP setting is automatically set to OFF. CAUTION You should always notify your network's administrator before changing the printer's IP address. 1 Turn on your PC and printer. 2 When the printer's message window displays READY, set the IP address. Press this key . . . (until) the message window reads . . . READY PROOF/PRINT MENU or if no optional hard disk is installed: PRINT MENU INTERFACE MENU JOB TIMEOUT ETHERNET TCP/IP Network Connection 187