Konica Minolta magicolor 7450 II grafx magicolor 7450 II Reference Guide - Page 316
Description, Enable, Disable, Range of IP
View all Konica Minolta magicolor 7450 II grafx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 316 highlights
Item Description Access Permis- If Enable is selected, the range of IP addresses permitted sion Address access to the printer can be specified. A maximum of five ranges of permitted IP addresses can be specified. In addition, access from an IP address out of the specified range is prohibited. If Disable is selected, the permitted access setting is disabled. Choices: Enable, Disable Default: Disable Range of IP address permitted access Specify the range of IP addresses permitted access to the printer. Type the IP address at the beginning of the range into the box on the left, and the IP address at the end of the range into the box on the right. Range: 0-255 for each xxx triplet Default: 0.0.0.0 " To specify a single IP address, type the same IP address into both the box for the starting IP address and for the ending IP address, or type "0.0.0.0" into the box for either the starting IP address or the ending IP address. " If the starting IP address is larger than the ending IP address, the setting is not applied. Access Refuse If Enable is selected, the range of IP addresses refused Address access to the printer can be specified. A maximum of five ranges of refused IP addresses can be specified. If Disable is selected, the refused access setting is disabled. Choices: Enable, Disable Default: Disable 296 Configuring the Printer