Konica Minolta magicolor 7450 II grafx magicolor 7450 II Reference Guide - Page 201
DEFAULT GATEWAY, DHCP/BOOTP, TELNET, Purpose, Range, Default, Options
View all Konica Minolta magicolor 7450 II grafx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 201 highlights
DEFAULT GATEWAY Purpose Range Default Sets the address of the router/gateway if a router/gateway is used on your network and you allow users outside your network environment to print on your printer. 0-255 for each xxx triplet Use the Up and Down keys to increase or decrease each number; use the Left and Right keys to move between triplets. 000.000.000.000 DHCP/BOOTP Purpose Options Default If there is a DHCP or BOOTP server on the network, specifies whether the IP address and other network information is automatically assigned by the DHCP or BOOTP server. ON OFF ON TELNET Purpose Options Default Select whether to enable or disable Telnet transmissions. When ENABLE is selected, Telnet transmissions are enabled. When DISABLE is selected, Telnet transmissions are disabled. ENABLE DISABLE ENABLE Ethernet Menu 181