Konica Minolta magicolor 7450 II grafx magicolor 7450 II Reference Guide - Page 254
Paper, Custom Size, Enable, Disable, Description
View all Konica Minolta magicolor 7450 II grafx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 254 highlights
Item Tray2 Paper Size Width Length Paper Type Description Indicates the setting for the size of paper loaded into Tray 2. Indicates the paper width when Paper Size is set to Custom Size. Indicates the paper width when Paper Size is set to Custom Size. Indicates the setting for the type of paper loaded into Tray 2. Size Settings Tray3/4/5 Paper Size This item appears only if Paper Type the optional lower feeder unit is installed. Indicates whether the paper size for Tray 2 is automatically detected or manually set. Indicates the setting for the size of paper loaded into the tray. Indicates the setting for the type of paper loaded into the tray. Tray Chaining If Enable is indicated and the specified paper tray runs out of paper during printing, a paper tray loaded with paper of the same size is automatically selected so printing can continue. Tray Mapping Tray Mapping Mode If Disable is indicated and the specified paper tray runs out of paper, printing stops. If On is indicated, Tray Mapping Mode is enabled. Paper is fed from the physical tray assigned to each logical tray. Logical Tray 0-9 If Off is indicated, Tray Mapping Mode is disabled. Indicates which physical tray is assigned to each logical tray. 234 Viewing Printer Status