Kyocera 9130DN Operation Guide - Page 56

Troubleshooting Message Corrective Action Call service ####:0123456 #### represents a mechanical error (#=0, 1, 2, ...). Call for service. The printer does not operate when this message is displayed. The total number of pages printed is also indicated, e.g. 0123456. Cassette # not loaded A cassette is not loaded properly in the printer. Properly load the cassette indicated by #. The number (#) of the cassette is from 1 to 4. Chad box full The punch unit chad box of the option document finisher is full. Discard the chads. Check chad box Press GO The punch unit waste box of the document finisher is full or is not installed correctly. Check if the box is properly installed, and then discard the chads if the box is full. Press [GO] to resume printing. ;Ò Clean printer Press GO Clean the inside of the printer. Refer to Toner Container Replacement on page 3-3. This message will be displayed when replacing the toner container after the message Replace toner Clean printer is displayed. After cleaning the ;Òinside of the printer, press [GO] and the printer will be ready for printing. Close finisher cover Close the option document finisher cover. Close front cover ;Ò Close the printer front cover. ;Ò Close Close the printer left cover. If left cover of the option paper feeder is open, 2 or 3 left cover 1(2,3) is displayed. Close mailbox cover ;Ò Close the mailbox cover. ;Ò Duplex disabled Press GO Duplex printing cannot be performed due to paper size or type. Press [GO] and the printer will print on one side only. ;Ò Error. Power off F### Turn the power switch off and then back on again. If this message still remains, turn the power switch off, and contact your service representative or authorized service center. Finisher tray ## paper full The finisher tray is full. When removing the paper, printing will be resumed. ## indicates the tray number. ;Ò 4-8 OPERATION GUIDE