Kyocera C8100DN Operation Guide - Page 53

Cancel], Message, Corrective Action - + manual

Page 53 highlights

Troubleshooting Message Corrective Action Print overrun Press GO ** The print job transferred to the printer was too complex to print on a page. Press [GO] to resume printing. (A page break may be automatically inserted in some places.). You can abandon printing by pressing [Cancel]. If Auto Error Clear is set to On, printing will automatically resume after a preset period of time. RAM disk error## Press GO A RAM disk error has occurred. Look at the error code given in place of ## and refer to Storage Error Codes on page 4-10. To ignore the RAM disk error, press [GO]. Replace toner C,M,Y,K Set paper Press GO Toner low C,M,Y,K Toner has run out in the toner container(s). Replace the toner container using a new toner kit for the particular color. The printer does not operate when this message is displayed. For example, if Replace toner C,K is displayed, replace the cyan and the black toner containers. The MP tray is out of paper. Load paper and press [GO]. (Note that feeding the paper having a paper size which does not match the current paper size from the MP tray can cause paper jam.) Replace the toner container using a new toner kit. The color of the toner container that needs to be replaced is represented by C (Cyan), M (Magenta), Y (Yellow), and K (Black). Top tray paper full Unknown toner installed Virtual mailbox full The top tray has become full (approx. 500 pages). You must remove all printed pages from the top tray. When the printer detects that the top tray is empty again, the printer will continue printing into the top tray. This message is displayed if the installed toner container is determined not to be an original Kyocera Mita toner container by the self-diagnostic performed after the power is switched on. If a toner container which indicates Toner low or Replace toner is installed to other printers of the same model, this message may be displayed. But, in this case, this toner container can be used. The storage area in the hard disk for the virtual mailboxes is full. Print out accumulated jobs in the virtual mailboxes. Warning low memory The printer's internal memory is running low because too many fonts and macros have been downloaded. Try deleting unnecessary fonts and macros. * Messages separated by '( )/( )' are displayed alternately. ** After this error occurs, page protect mode will be turned on automatically. To maintain optimum use of memory during printing, we recommend you manually turn off page protect mode. 4-9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72

Troubleshooting
4-9
**
The print job transferred to the printer was too complex to print on a page. Press
[GO]
to
resume printing. (A page break may be automatically inserted in some places.).
You can abandon printing by pressing
[Cancel]
.
If Auto Error Clear is set to
On
, printing will automatically resume after a preset period of time.
A RAM disk error has occurred. Look at the error code given in place of
##
and refer to
Storage Error Codes
on page
4-10
. To ignore the RAM disk error, press
[GO]
.
Toner has run out in the toner container(s). Replace the toner container using a new toner kit
for the particular color. The printer does not operate when this message is displayed.
For example, if
Replace toner C,K
is displayed, replace the cyan and the black toner
containers.
The MP tray is out of paper. Load paper and press
[GO]
. (Note that feeding the paper having
a paper size which does not match the current paper size from the MP tray can cause paper
jam.)
Replace the toner container using a new toner kit. The color of the toner container that needs
to be replaced is represented by
C
(Cyan),
M
(Magenta),
Y
(Yellow), and
K
(Black).
The top tray has become full (approx. 500 pages). You must remove all printed pages from
the top tray. When the printer detects that the top tray is empty again, the printer will continue
printing into the top tray.
This message is displayed if the installed toner container is determined not to be an original
Kyocera Mita toner container by the self-diagnostic performed after the power is switched on.
If a toner container which indicates
Toner low
or
Replace toner
is installed to other
printers of the same model, this message may be displayed. But, in this case, this toner
container can be used.
The storage area in the hard disk for the virtual mailboxes is full. Print out accumulated jobs in
the virtual mailboxes.
The printer’s internal memory is running low because too many fonts and macros have been
downloaded. Try deleting unnecessary fonts and macros.
*
Messages separated by ‘( )/( )’ are displayed alternately.
**
After this error occurs, page protect mode will be turned on automatically. To maintain optimum use of memory during
printing, we recommend you manually turn off page protect mode.
Message
Corrective Action
Print overrun
Press GO
RAM disk error##
Press GO
Replace toner
C,M,Y,K
Set paper
Press GO
Toner low
C,M,Y,K
Top tray
paper full
Unknown toner
installed
Virtual mailbox
full
Warning
low memory