Kyocera ECOSYS M8124cidn M8124cidn/M8130cidn Operation Guide - Page 121
Changing Security Settings, Con the function., Display the screen.
View all Kyocera ECOSYS M8124cidn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Installing and Setting up the Machine > Command Center RX 2 In the address or location bar, enter the machine's IP address or the host name. Click in the following order to check the machine's IP address and the host name. [Device Information] in the home screen > [Identification/Wired Network] Examples: https://192.168.48.21/ (for IP address) https://MFP001 (if the host name is "MFP001") The web page displays basic information about the machine and Command Center RX as well as the current status of the machine. NOTE If the screen "There is a problem with this website's security certificate." is displayed, configure the certificate. Command Center RX User Guide You can also continue the operation without configuring the certificate. 2 Configure the function. Select a category from the navigation bar on the left of the screen. NOTE To fully access the features of the Command Center RX pages, enter the User Name and Password to login. Entering the predefined administrator password allows the user to access all pages, including Document Box, Address Book, and Settings on the navigation menu. The factory default setting for the default user with administrator privileges is shown below. (Upper case and lower case letters are distinguished (case sensitive).) Login User Name: Admin Login Password: Admin Changing Security Settings 1 Display the screen. 1 Launch your Web browser. 2-43