Kyocera ECOSYS M8124cidn M8124cidn/M8130cidn Operation Guide - Page 361
Selecting [On] displays IP address in [IP Address Link Local] after restarting the, LAN Interface]
View all Kyocera ECOSYS M8124cidn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 361 highlights
System Menu > [System/Network] Item IPv6 IPv6 Manual Setting RA (Stateless) DHCP Description Set up TCP/IP (IPv6) to connect to the network. This setting is available when [TCP/IP] is [On]. Select whether to use IPv6. Value: Off, On NOTE Selecting [On] displays IP address in [IP Address (Link Local)] after restarting the network. Manual Setting (IPv6) Manually specify the IP address, prefix length, and gateway address of TCP/IP (IPv6). Value IP Address (Manual): 128-bits address is expressed in eight groups consisting of four-digit hexadecimal digits. The groups are separated by colon (:). Prefix Length: 0 to 128 Default Gateway: 128-bits address is expressed in eight groups consisting of four-digit hexadecimal digits. The groups are separated by colon (:). NOTE This function is displayed when [IPv6] is set to [On]. To enter [Default Gateway], set [RA (Stateless)] to [Off]. Select whether to use RA (Stateless). Value: Off, On NOTE This function is displayed when [IPv6] is set to [On]. Selecting [On] displays IP address in [IP Address (Stateless)] after restarting the network. Select whether to use the DHCP (IPv6) server. Value: Off, On NOTE This function is displayed when [IPv6] is set to [On]. Selecting [On] displays IP address in [IP Address (Stateful)] after restarting the network. IMPORTANT After changing the setting, restart the network or turn the machine OFF and then ON. [Restart Network] (8-49) [LAN Interface] Item LAN Interface Description Specify the settings for the LAN interface to be used. Value: Auto, 10Base-Half, 10Base-Full, 100Base-Half, 100Base-Full, 1000BASE-T IMPORTANT After changing the setting, restart the network or turn the machine OFF and then ON. [Restart Network] (8-49) 8-40