Kyocera FS-C5100DN FS-C5100DN/C5200DN/C5300DN KX Driver User Guide Ver. 7.7 - Page 8
Custom Installation, Windows XP - USB - kx
UPC - 632983010280
View all Kyocera FS-C5100DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Installation Windows XP - USB 5 On the Discover Printing System page, click Information if you want to open a dialog box with details about IP Address, Host Name, Printer Model, Contact, Location, and Serial Number. Click Next. 6 In Printer Settings, you can assign a name to the printing system. This is the name that appears in Windows Printers and Faxes and in the printer list in applications. 4 Note: If your printer is connected locally, Printer Settings does not appear, skip to step 7. You can also choose to share this printer with others or set this printer as the default printer. Make your selection and then click Next. 5 7 On the Confirm Settings page, click Install if the settings are correct. Click Back to correct the settings. 6 8 The Installation Completed page appears showing the installation details. • Select Device Settings to open the Device Settings tab where you can choose installed options for your printing system. In Windows Vista or a USB connection, the Device Settings check box is not displayed. • Select Enable Status Monitor to display system status messages on your computer screen during printing tasks. For more information, see Status Monitor on page 2-13. • Select Print a test page to verify a connection with the printer and create a print out of the installed driver components. When the installation completes successfully, click Finish to exit the Printer Installation Wizard and return to the CD-ROM main menu. For software installation failures, a message box appears, One or more software installations have failed. See the details below. Click Finish and retry the installation. If the same message appears again, contact your system administrator. The installation of the printer is now complete. If prompted, restart your system. Custom Installation When using the Custom mode you can specify the printer port and choose which software packages to install. For information, see Windows Vista KX XPS Driver on page 2-11. Windows XP - USB 1 Ensure that your printer and computer are connected using the USB cable. 1 2 On the Installation Method page, select Custom Mode > Driver. If you also want to install fonts, select Utilities. 2 3 On the Connection Type page, select Universal Serial Bus (USB), and then click Next. 3 The Printing System page appears in certain conditions, for example, when the installer cannot detect the USB connection. From the list, select the printing system to install. Click Next. 4 1-3 KX Driver