Kyocera FS-C5200DN FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (Advance - Page 91
Password Administrator Password input, I/F Block Interface external device block setting
View all Kyocera FS-C5200DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Password _ >I/F Block Password (Administrator Password input) To set up the Security functions, you must enter an administrator ID and administrator password. For information on how to set the administrator password, refer to Admin (Administrator settings) on page 2-81. 1 Once you have entered the correct ID in the previous step (ID (Administrator ID input)), the message display shows Password (Administrator password input) and a blinking cursor (_). 2 Press U or V to increase or decrease, respectively, the value at the blinking cursor. Enter the specified password. Use Y and Z to move the cursor right and left. Enter a password consisting of between 0 (no settings) and 16 numbers. Note If you enter the incorrect administrator ID or password, the message Wrong ID or Wrong Password appears and the input screen then reappears. Re-enter the ID or password correctly. 3 Press [OK]. The Security screen appears. I/F Block (Interface (external device) block setting) You can use this to lock and thereby protect the interface. The options available in Interface Block are as follows: • USB Host (USB memory slot setting) • USB Device (USB interface setting) • Optional interface (Network interface card setting) > 1 After entering the administrator ID and password, press U or V repeatedly until >I/F Block > appears. >>USB Host ? Unblock USB Host (USB memory slot setting) This locks and protects the USB memory slot (USB host). The default setting is Unblock. 1 Press Z while >I/F Block appears. > is displayed. >>USB Host 2 Press [OK]. A blinking question mark (?) appears. 3 Select Block or Unblock using U or V. 4 Press [OK]. 5 Press [MENU]. The display returns to Ready. Using the Operation Panel 2-67