Kyocera KM-1810 Printing System M Instruction Handbook (Functions Edition)
Kyocera KM-1810 Manual
View all Kyocera KM-1810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Kyocera KM-1810 manual content summary:
- Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 1
INSTRUCTION HANDBOOK Introduction Chapter 1 Printer-related operation s 1. Printer Settings s 2. Memory Card / RAM Disk Chapter 2 Software-related operation s 1. Procedure for Installing and Printing with a Printer Driver s 2. Windows XL Driver s 3. Printer Driver for Windows 95/ - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 2
in combination with the Instruction Handbook for that product. This manual contains information on making settings in your printer, as well as on installing and setting the printing properties for the corresponding Printer Drivers. The explanations in this manual were written with - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 3
INTERNATIONAL BUSINESS MACHINES CORPORATION ("IBM or partial copies of it, including modified copies or portions developer of Programs supplied to IBM. IBM's and the developer's limitations of remedies are not cumulative. Such developer acquired the Program in the United States, this license is - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 4
printer the digitally encoded, machine readable, scalable outline Agfa Japan or destroy all copies of the Software and Typefaces specifications. Agfa Japan does not warrant that the Software is free from all bugs, errors and Typefaces is repair or replacement of defective parts, upon their return - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 5
1 Press the Printer key. The machine will switch to the printer mode and "P00" will appear in the copy quality/magnification display. network address, press the Enter key after each block of 3 digits. 4 Press the Printer key again to switch back to the copier - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 6
Settings s Operation keys Copy quality/magnification display Printer Key Stop/Reset (Cancel) key Zoom (-) key Enter key Zoom (+) key Start (Go) key Copy quality/magnification display Printer Key Stop/Reset (Cancel) key Zoom (-) key Enter key Zoom (+) key - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 7
ON/OFF (1) On Sets whether a Status Page regarding conditions in (2) Off the Network Card will be printed out as well when the standard Status Page for the printer (menu: P11) or that for use by your service representative (menu: P76) are printed out. A more detailed Status Page is printed - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 8
LQ-850 (5) PCL 6 P40 Number of copies 001 - 999 P42 Page Protect (1) Auto If "AUTO" (setting: 1) is selected here, the machine (2) On will monitor the data and, if necessary, will automati- cally turn Page Protect ON. If a "Print overrun" error (error code: E80) does happen to occur even - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 9
.) If "000" seconds is selected here, successive pages will not be printed until they are manually force- printed (by pressing the Start (Go) key in the printer mode). Remarks Available only when the Network Card is installed. At least 16 MB of additional memory (option) must be installed. 1-5 - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 10
Printer reset (1) OK Resets the Printer Board only even without turning the power to the machine OFF. P73 Resource protect mode (1) Off Protects the resource data of fonts and macros (2) Permanent downloaded time. "Memory overflow (error code : E70)" "Print overrun (error code : E80)" P75 - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 11
RAM Disk is created from that portion of the printer's memory that is normally available to the user. Thus, if the size of the RAM disk on the operation panel of the copier itself. Refer to "1. Printer Settings" on page 1-1, as appropriate to your machine, for information on the appropriate procedure - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 12
corresponding partition) E: Command operation end F: Printer connection port (Network: "PRN", Local: "LPT1", etc.) CAUTIONS • When issuing DOS commands in the Japanese input mode, ALWAYS use JIS ASCII (JIS C6220) characters. Kanji Code and Kanji HalfSpace Code - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 13
to a RAM Disk, simply change the "A" parameter to "0". C:\WINDOWS>ECHO !R! RWER W,A,2,"SAMPLE.txt";>LPT1_ 3 Send the print data from your computer. C:\WINDOWS>COPY /b SAMPLE.txt LPT1 4 Once the print data is sent, the next command can be sent. C:\WINDOWS>ECHO !R! WRED; EXIT;>LPT1_ 5 Print out the - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 14
as the font data is written to disk, it will be sent to the printer as well. * Verify beforehand that the Memory Card is in a write-enabled data length (binary data bytes) 3 Send the font data from your computer. C:\WINDOWS>COPY /b FONT1 LPT1_ 4 Once the font data is sent, the next command can be - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 15
2. Memory Card / RAM Disk 2-3-5 Reading print data Perform the following procedure when you want to read print data that has been saved on a Memory Card or RAM Disk. * Verify beforehand that the Memory Card is in a write-enabled state and that the RAM Disk is turned ON. * To verify saved data and - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 16
2. Memory Card / RAM Disk 2-3-7 Printing out the Partition List Perform the following procedure when you want to print out the Partition List in order to verify the print data and font data that has been saved on a Memory Card or RAM Disk. Procedure 1 Open an MS-DOS Prompt in Windows. 2 Type in the - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 17
Included printer drivers The following printer drivers are included with this product. * Each type of printer driver has a version appropriate to a specific model of copy machine. Be sure to choose the driver that is appropriate for your copier. Driver type Universal driver XL driver KPDL2 driver - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 18
1. Procedure for Installing and Printing with a Printer Driver 1-2 System Conditions qWindows 95 System requirements Recomended requirements CD-ROM drive Parallel interface port CPU RAM HDD CPU RAM HDD IBM PC / AT or compatible - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 19
be made. s Network Click to display the printmonitor's installation menu. Follow the instructions displayed on the screen to install the print monitor. s Documentation Click to display the manual (PDF) supplied with the printer driver. To open this PDF manual, Adobe Acrobat Reader (developed to view - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 20
Printing with a Printer Driver 1-4 Installing the Printer Driver (Windows) Install the printer driver as follows: * The printer can be connected to the computer by one of the following two methods: local or network. If you want to connect them through network, refer to the operation manual of the - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 21
Installing and Printing with a Printer Driver 7 Select the driver type. From the list, select the type of driver to be installed, then click Next. * Refer to "1-1 Included printer Drivers" on page 1-1 for information regarding each printer driver. 8 The End User Licence Agreement will be displayed - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 22
No if not. 15 The settings you have made so far will appear. If they are correct, click Next. Installation of the printer driver will start. 16 To exit installation, click Finish. * If you want to add another printer driver, click Add Printer and then repeat the same procedure. Installation of the - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 23
-ROM drive on your computer. The window shown on the right will appear. 3 Click on [Driver Tools] and then on [Remove Drivers] from the subsequent menu. The [Remove Printer Drivers] dialog box will appear. Select the driver that you want to delete and then click on [Uninstall]. 4 A message to verify - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 24
recommended that you read the section corresponding to your operation system as it will contain further explanations specifically regard that OS and other related drivers. 1 q Making the printer driver settings in Windows Click on [Start] on the Task Bar. The Start menu will appear. 2 Use the - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 25
Installing and Printing with a Printer Driver 6 q Printing from the application Use the application that you want to use to open the document that you want to print. 7 Select [Print] in the [File] menu. The [Print] dialogue box will appear. 8 Select the desired number of copies that you want to - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 26
, the screenshots shown here may differ somewhat from that of the actual printer driver. * Refer to the Instruction Manual for Windows regarding items that are not explained in this Instruction Handbook. 2-1 Making printing and property settings 1 Start up Windows. 2 Click on [Start] in the Task - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 27
2. Windows XL Driver 2-2 Media Tab s Paper Size: Allows you to select a standard size of paper or an envelope size. The following sizes of paper or envelope can be used with this printer. Standard-size paper sheet Envelope Letter (8-1/2" x 11"), Legal (8-1/2" x 14"), Statement (5-1/2" x 8-1/2"), - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 28
2. Windows XL Driver 2-2-1 Custom Media Size dialog box s Setting a custom paper setting of your application. 1 Select the desired unit of measurement in the "Units" block and the desired dimensions of the paper in the "Size" block. Units: "Inches" or "Millimeters" Height: 5. - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 29
2. Windows XL Driver 2-3 Layout Tab s Pages per Sheet: Allows you to print reduced images of multiple (1, 2, 4, 6, 9, 16 or 25) pages onto a single sheet of paper. This function is - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 30
The factory default setting is "Download TrueType fonts as outline". [Download TrueType fonts as outline TrueType fonts will be downloaded to the printer as outline fonts for printing. [Download TrueType fonts as bitmap TrueType fonts will be downloaded to the printer as bitmap fonts for printing - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 31
2. Windows XL Driver 2-5 Output Tab s Copies Specifies the number of prints to be made. Select between 1 and 999 copies by clicking on the arrows at the right of the field or by typing the desired number directly into the field. The factory default setting - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 32
XL Driver 2-6 Device function of the installed option will be added to the printer. s Device Options Select and installed options here. Once "Device Options" list. s User... Click on this button when you want to register a user and/or department name. The [User Settings] dialog box will appear - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 33
2. Windows XL Driver 2-6-1 User Settings s General Register the desired user and/or department name. s Page Description Language The emulation modes that can be used with this product will be displayed in the dropdown list. If - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 34
95 or Windows 98 as their operating system. * Depending upon version upgrades of the printer driver, the screenshots shown here may differ somewhat from that of the actual printer driver. * Refer to the Instruction Manual for Windows or to On-Line Help for information regarding items that are not - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 35
Driver) s Paper size: Select the size of standard-size paper sheet or envelope. The following standard-size paper sheets and envelopes can be used with this printer setting is "Auto Select". s Media choice(EcoPrint) Saves on toner. The factory default setting is "Off". s Unprintable Area... Click - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 36
3. Printer Driver for Windows 95/98 3-3 Graphics Tab (Universal Driver) s Resolution: Specify the desired print resolution. The resolution must be printing speed will be increased. However, if you experience trouble (the positioning of objects is not correct, etc.) select "Use raster graphics". 3-3 - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 37
3. Printer Driver for Windows 95/98 3-4 Device Option Tab (Universal Driver) s Printer memory: Perform this setting according to the amount of memory in your printer. If a mistake is made in this setting, there is a possibility that printing will not be accomplished properly. 3-4 - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 38
for Windows 95/98 3-5 Paper Tab (KPDL2 Driver) s Paper Size: Select the size of standard-size paper sheet or envelope. The following standard-size paper sheets and envelopes can be used with this printer: Standard-size paper sheet Envelope Letter (8 1/2" x 11"), Legal (8 1/2" x 14"), Statement - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 39
3. Printer Driver for Windows 95/98 3-6 Graphics Tab (KPDL2 Driver) s Resolution: Specify the desired print resolution. The halftones. To return to the default settings after you have made changes, click Use printer's settings. s Special: [Print as a negative image] ...... Prints a negative of - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 40
Windows 95/98 3-7 Device Options Tab (KPDL2 Driver) s Available printer memory (in KB) Indicates the amount of setting for: xxxx". Functions available for selection are as follows: q EcoPrint Saves on toner. The factory default setting is "Off". q Edge Smoothing Turning this setting "On" allows - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 41
3. Printer Driver for Windows 95/98 3-8 PostScript Tab (KPDL2 Driver) Allows you to make PostScript-related settings. Refer to On-Line Help for more detailed information. 3-8 - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 42
use Windows NT4.0 as their operating system. * Depending upon version upgrades of the printer driver, the screenshots shown here may differ somewhat from that of the actual printer driver. * Refer to the Instruction Manual for Windows or to On-Line Help for information regarding items that are not - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 43
is from 1 to 999. Setting can be made in the "Change 'Copy Count' Setting" area. Click the arrow buttons (v,w) or enter directly from the keyboard. The factory default setting is "1". 4-3 Graphic (Universal Driver) s Resolution: Specify the desired print resolution. The resolution must be specified - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 44
4. Printer Driver for WindowsNT 4-4 Document Options (Universal Driver) s Media: Saves on toner. Setting can be made in the "Change 'Media' Setting" area. The factory default setting is "Eco Print-Off". 4-3 - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 45
is from 1 to 999. Setting can be made in the "Change 'Copy Count' Setting" area. Click the arrow buttons (v,w) or enter directly from the keyboard. The factory default setting is "1". 4-6 Graphic (KPDL2 Driver) s Resolution: Specify the desired print resolution. The resolution must be specified - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 46
4. Printer Driver for WindowsNT 4-7 Document Options (KPDL2 Driver) 4-7-1 PostScript Options: Allows you to make PostScript-related settings. Refer to On-Line Help for more detailed information. 4-5 - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 47
4. Printer Driver for WindowsNT 4-7-2 Printer Features s EcoPrint: Saves on toner. Setting can be made in the "Change ' Allows you to select whether to sort the copies in the case of multiple copy. [None Does not sort. [Sort Prints in the order of 1st, 2nd, 3rd copies and so on. * It is necessary - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 48
, select "Properties" in step 4 on page 4-1 and then click on the "Device Settings" Tab. s Installed Memory (Kilobyte) Perform this setting according to the amount of memory in your printer. If a mistake is made in this setting, there is a possibility that printing will not be - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 49
use Windows 2000 as their operating system. * Depending upon version upgrades of the printer driver, the screenshots shown here may differ somewhat from that of the actual printer driver. * Refer to the Instruction Manual for Windows or to On-Line Help for information regarding items that are not - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 50
the following: [Portrait Prints lengthwise. [Landscape Prints widthwise. [Rotated Landscape Selecting this option prints upside down. (only available with KPDL2 Driver) s Page Order The Printer has the ability to print from the 1st page or from the last page. * It is necessary to enable "Advanced - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 51
5. Printer Driver for Windows2000 5-3 Paper/Quality Tab : (Tray Selection) s Paper Source: (Universal Driver) Select the desired location of corresponding function in order to use that item. s Paper Source: (KPDL2 Driver) Select the desired location of paper feed from the pulldown menu. The factory - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 52
5. Printer Driver for Windows2000 5-4 Advanced Options The following explains the Advanced Options dialog box. * The explanations here are focused mostly on the special features of this product. Refer to On-Line Help for information regarding items that are not explained in this Instruction Handbook - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 53
5. Printer Driver for Windows2000 5-4-3 Document Options s Advanced Printing Features: Be sure to select "Enable" for this setting if you want to use the "Pages Per Sheet" (N-Up) function or the "Back to Front" option under the "Page Order" setting. 5-5 - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 54
5. Printer Driver for Windows2000 5-4-4 Printer Features s Eco print: Saves on toner. copies and so on. * If you are using a KPDL2 Driver, it is necessary to create a RAM disk. (Refer to page 5-8.) * If you are using a Universal driver, it is necessary to increase the memory capacity of your printer - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 55
5. Printer Driver for Windows2000 5-4-5 PostScript Options: This option can only be used with a KPDL2 Driver. Allows you to make PostScript-related settings. Refer to On-Line Help for more detailed information. 5-7 - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 56
5. Printer Driver for Windows2000 5-5 Device Settings Tab In order to view this window and make add optional equipment. The functions of the optional equipment will only be available to the printer after you have completed the setting here. The optional equipment available for selection are as - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 57
start installation of the printer driver. Follow the instructions displayed on the screen to install the printer driver. B: [Documentation] Click to display the manual (PDF file) supplied with the printer driver. To open this PDF manual, Adobe Acrobat Reader (developed to view PDF files) is required - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 58
6. Printer Driver for Macintosh 2 Double-Click on the icon for the CD-ROM disk. "A copy machine product name of use" dialog box will appear. 3 Double-Click on "the copy machine product name of use" Installer icon. The window shown on the right will appear. Click on "Continue". 4 A dialog box will - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 59
6. Printer Driver for Macintosh 7 Access the Apple Menu at the far left of the Menu of Bar and select Chooser. The Chooser will appear. Click once on the LaserWriter 8 icon. 8 Select the name of this printer in the [Select a PostScript Printer] list and then click on the [Create] button. * The name - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 60
option and settings may differ somewhat depending upon the application and version of LaserWriter that you are using. s Printer: Selects the desktop printer to be used for printing your document. s Copies: Type the desired number of prints to be made (or the number of files to be saved to disk - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 61
6. Printer Driver for Macintosh 6-4 Layout Dialog Box s Pages per sheet: Sets the number of pages to be printed on each sheet of paper. s Layout Direction: A button of - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 62
6. Printer Driver for Macintosh 6-5 Printer Specific Options s Resolution: Specifies the printing resolution (number : Allows you to select whether to sort the copies in the case of multiple copy. [Off Does not sort. [On Prints in the order of 1st, 2nd, 3rd copies and so on. * It is necessary to - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 63
6. Printer Driver for Macintosh 6-6 Page Setup dialog Dialog Box Settings for paper size, depending upon the application and the version of LaserWriter that you are using. * For the user using Mac OS 7.6.1, we strongly recommend that you update the LaserWriter8.3.2 to Laser Writer 8.5.1. s Format - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 64
6. Printer Driver for Macintosh 6-7 PostScript Dialog Box The actual layout of each dialog box and the available options and settings may differ somewhat depending upon the application - Kyocera KM-1810 | Printing System M Instruction Handbook (Functions Edition) - Page 65
6. Printer Driver for Macintosh 6-8 Custom paper sizes Dialog Box When a paper sizes is selected in "Custom paper sizes" Dialog Box , the paper size can be set as
INSTRUCTION HANDBOOK
<Functions Edition>
Introduction
Chapter 1
Printer-related operation
■
1. Printer Settings
■
2. Memory Card / RAM Disk
Chapter 2
Software-related operation
■
1. Procedure for Installing and Printing
with a Printer Driver
■
2. Windows XL Driver
■
3. Printer Driver for Windows 95/98
■
4. Printer Driver for Windows NT
■
5. Printer Driver for Windows 2000
■
6. Printer Driver for Macintosh