Kyocera KM-1810 Printing System M Instruction Handbook (Functions Edition) - Page 54
Auto Size Select]
![]() |
View all Kyocera KM-1810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
5. Printer Driver for Windows2000 5-4-4 Printer Features s Eco print: Saves on toner. The factory default setting is "Off". s Edge Smoothing: Turning this setting "On" allows the jaggies that appear around the edge of text and graphics to be evened out through the smoothing process. s PagePolicy: (only available with KPDL2 Driver) Perform this setting in conjunction with the settings to be made under "Paper Source" on page 5-3. [Auto Size Select Select this setting when you want to select "Automatically Select" under "Paper Source". [Cassette Base Select this setting when you want to select the source of paper feed according to the tray under "Paper Source". * If you are going to select "Automatically Select" under "Paper Source", be sure to select "Auto Size Select" here or there is a possibility that printing will be accomplished onto paper that is difference the expected. s Job Spooling: Allows you to select whether to sort the copies in the case of multiple copy. [None Does not sort. [Temporary Prints in the order of 1st, 2nd, 3rd copies and so on. * If you are using a KPDL2 Driver, it is necessary to create a RAM disk. (Refer to page 5-8.) * If you are using a Universal driver, it is necessary to increase the memory capacity of your printer and then change the "Memory" setting to more than 24 MB. (Refer to page 5-8.) 5-6
![](/manual_guide/products/kyocera-km1510-printing-m-instruction-handbook-functions-edition-b938796/54.png)