Kyocera KM-2530 2530/3530/4030 Operation Guide Rev 2C - Page 32
Auto shut-off function, Energy saver preheat function
View all Kyocera KM-2530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
CHAPTER 4 BASIC OPERATION 4. Energy saver (preheat) function This function turns the machine off to save energy by pressing the [Energy Saver] (preheat) key, while leaving the main switch turned ON. When this function is activated, the Energy Saver (preheat) indicator is the only indicator lit on the operation panel. To resume copying after the energy saver (preheat) function has been activated, press the [Energy Saver] key again. It will take the copier about 30 seconds to return to a copy-ready state. Management Interrupt Energy Saver * Reset 3 StoCpl/ear 2 1 6 5 4 9 Start 8 7 # 0 * Energy Saver NOTE • The energy saver (preheat) function will also engage automatically in this copier if no operation is performed for a predetermined period of time. (See "Auto preheat time" on page 6-17.) 5. Auto shut-off function This function automatically turns the main switch OFF (ࠗ) if no copying operation is performed for a certain period (15 to 240 minutes). To make copies again, set the main switch to the ON ( I ) position. • Auto shut-off function The auto shut-off function is a power saving feature which automatically turns the main switch OFF (ࠗ) when a certain time elapses with out copying being performed. Copiers are generally in the standby mode more than operation mode, and power consumption in the standby mode accounts for a large part of overall consumption. Having the copier turn OFF (ࠗ) automatically reduces unnecessary power consumption in the standby mode or at night if the copier is left on. The result is a lower electricity bill. NOTE • To change the time remaining until the auto shut off function operates, see "Auto shut-off time" on page 6-17. To cancel the auto shut-off function, see "Auto shut-off ON/OFF" on page 622. • If the optional printer board or printer/scanner kit is installed in your copier, the copier will enter the energy-saving preheat mode whenever the auto shut-off function engages. In this state, when the copier detects data for a print job, it will automatically recover to a print-ready state and printout of the corresponding information will begin. • If the optional fax kit is installed in your copier, the copier will be automatically turned OFF (ࠗ) whenever the auto shut-off function engages. In this state, when the copier receives an incoming fax, it will automatically recover to a print-ready state and printout of the corresponding information will begin. 4-8