Kyocera TASKalfa 181 Fax System (R) Operation Guide - Page 182

Various Settings and Registration Selecting the Paper Feed Selection Mode ("Fax Paper Feeding Tray" setting) Select here among the 3 available modes for feeding paper when printing out all documents that are received when the fax is in the Fax Operation mode - as well as for printing out reports and lists: the Auto Selection mode, the Fixed Size mode or the Fixed Cassette mode. Note This setting CANNOT be changed while there are documents remaining in memory. In this mode, the fax will automatically select and feed the most appropriate paper. In this mode, paper feed will be accomplished from the drawer that contains the selected size of paper. If there is no paper of the selected size in any drawer, the documents will be received directly into memory. You CANNOT select more than one size of paper in this setting. If the same size of paper is set in more than one location, the upper drawer will have priority for paper feed. In this mode, paper feed will be accomplished from a specified drawer regardless of the size of the received documents. If there is no paper in the selected drawer, the documents will be received directly into memory. You CANNOT select more than one drawer in this setting. Note 1 If you want to cancel the procedure part way through, press the Reset key. The operation panel will return to the initial mode settings. Pres the System Menu key. 2 Press the T key to select Fax Default. 3 Press the Enter key. 4 Press the S key or the T key to select PaperFeed Sel. 5 Press the Enter key. System Menu / Counter Machine Default Printer Default Fax Default Fax Default: Receive Mode RX Date/Time PaperFeed Sel. :Fax Recept :Off :AutoSelect 7-14