Kyocera TASKalfa 181 Fax System (R) Operation Guide - Page 39

Fax Operation (Basic Use) 4 Selecting the resolution It is possible to select a resolution from among the 5 available settings. • Normal: For transmitting documents with standard size characters • Fine: For transmitting documents with relatively small characters or thin lines • Super fine: For transmitting documents with detailed lines and characters • Ultra fine: For transmitting the clearest reproduction of documents with detailed lines and characters • Half tone [Half-tone]: For transmitting the clearest reproduction of documents containing both photographs as well as text The default setting is for Normal resolution. Ordinarily, all of the resolution indicators are out; and the Normal resolution is thus selected. If you want to use the Normal resolution, there is no need to change this setting. If you want to change the resolution, press the resolution select key until the resolution indicator that corresponds to the desired resolution is lit. Important! 5 • The Fine and Super fine resolutions reproduce clearer images in comparison to transmission with the Normal resolution, but transmission time is longer. • The Half tone [Half-tone] resolution reproduces grays clearly, but transmission time is longer than with the Normal or Fine resolutions. • To transmit with the Ultra fine resolution, 32 MB of optional memory must be installed. If the additional memory is NOT installed, the Ultra fine resolution will not selectable. • To transmit with the Super fine or Ultra fine resolutions, the receiving fax must have the corresponding resolution capabilities in order to benefit from their features. If the receiving fax does not have the corresponding capability, transmission will be accomplished with the Fine resolution Selecting the contrast Press the contrast select key to select, from among the 3 available settings, the degree of contrast at which the documents will be scanned. Ordinarily, the middle indicator is lit. If you want the darkest possible contrast, make sure the rightmost indicator is lit. If you want the lightest possible contrast, make sure the leftmost indicator is lit. 2-5