Kyocera TASKalfa 3010i 3010i/3510i Operation Guide - Page 375
System/Network, Network
View all Kyocera TASKalfa 3010i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 375 highlights
System Menu > Default Setting on the Machine (System Menu) System/Network Configure machine system settings. Network System/Network Network Configure network settings. Host Name Item Host Name Description Check the host name of the machine. Host name can be changed from Command Center RX. Changing Device Information (page 2-42) TCP/IP Setting TCP/IP Item IPv4 IP Address Subnet Mask Default Gateway DHCP Auto-IP Description Select whether to use TCP/IP Protocol. Value: Off, On Set up TCP/IP (IPv4) to connect to the network. This setting is available when [TCP/IP] is set to [On]. Set the IP addresses. Value NOTE When DHCP is set to [On], this function will be grayed out and the value cannot be entered. Set the IP subnet masks. Value NOTE When DHCP is set to [On], this function will be grayed out and the value cannot be entered. Set the IP gateway addresses. Value NOTE When DHCP is set to [On], this function will be grayed out and the value cannot be entered. Select whether to use the DHCP (IPv4) server. Value: Off, On Select whether to use Auto-IP. Value: Off, On IMPORTANT After changing the setting, restart the network or turn the machine OFF and then ON. 8-43