Kyocera TASKalfa 3010i 3010i/3510i Operation Guide - Page 390
Auto Color Correction, 1 Color
View all Kyocera TASKalfa 3010i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 390 highlights
System Menu > Default Setting on the Machine (System Menu) Item Auto Color Correction Tone Curve Adjustment Drum Refresh Description This setting allows you to adjust the detection level used by the machine to determine whether the original is color or black and white in Auto Color Selection Mode. Setting a lower value will result in more originals being identified as color, while a larger value will tend to increase the number of originals being identified as black and white. Value: 1 (Color), 2, 3, 4, 5 (B & W) After prolonged use, or from the effects of surrounding temperature or humidity, the printed output tone may differ from the original. Perform this function to ensure consistency with the original tone. For the procedure, refer to Tone Curve Adjustment on page 10-33. Remove image blur and white dots from the printout. It takes about 2 minutes and 30 seconds. The time required may vary depending on the operating environment. For more information, refer to the Drum Refresh on page 10-34. NOTE Drum Refresh cannot be performed while printing. Execute Drum Refresh after the printing is done. 8-58