Kyocera TASKalfa 3010i 3010i/3510i Operation Guide - Page 88
Network Setup (LAN Cable Connection), TCP/IP Settings
View all Kyocera TASKalfa 3010i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Installing and Setting up the Machine > Default Settings of the Machine Network Setup (LAN Cable Connection) The machine is equipped with network interface, which is compatible with network protocols such as TCP/IP (IPv4), TCP/IP (IPv6), IPX/SPX, NetBEUI, and IPSec. It enables network printing on the Windows, Macintosh, UNIX, NetWare and other platforms. This section explains the procedure of IPv4 and Bonjour settings for TCP/IP settings. For other network settings, refer to the Network on page 8-43. NOTE If user login administration is enabled, you can only change the settings by logging in with administrator privileges. If user login administration is disabled, the user authentication screen appears. Enter a login user name and password, and press [Login]. The factory default login user name and login password are set as shown below. Model Name 3010i 3510i Login User Name 3000 3500 Login Password 3000 3500 TCP/IP Settings IPv4 setting Set up TCP/IP (IPv4) to connect to the Windows network. The default settings are "TCP/IP Protocol: On, DHCP: On, Auto-IP: On". NOTE • Ask your network administrator for the IP address in advance, and have it ready when you configure this setting. In the following cases, set the IP address of DNS server on the Command Center RX. • When using the host name with "DHCP" setting set to "Off" • When using the DSN server with IP address that is not assigned by DHCP automatically. Refer to the Command Center RX User Guide. 1 Display the screen. 1 Press the [System Menu] key and select [System/Network]. 1 System Menu Quick Setup Wizard Common Settings 2 Copy Document Box/Removable Memory Printer System/Network Cassette/MP Tray Settings Home Send FAX Report 1/2 Close 2-28