LG 32LC2DA Operation Guide - Page 25
lnsL_flation
View all LG 32LC2DA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
lnsL_flation 1. Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use. 2. When Source Devices connected with HDMt/DVl Input, output PC Resolution (VGA, SVGA, XGA, WXGA), Position and Size may not fit to Screen.Press the ADJUST button to adjust the screen Position of TV SET and contact an PC graphics card service center. 3 When Source Devices connected with HDMI/DVl Input, output TV SET Resolution (480p, 720p, 1080i) and TV SET Display fit EIA/CEA-861-B Specification to Screen. tf not, refer to the Manual of HDMI/DVi Source Devices or contact your service center. 4. In case HDMI/DVl Source Devices is not connected Cable or poor cable connection, "NO SIGNAL" OSD display in HDMJ/DVl Input, In case that Video Resolution is not supported TV SET output in HDMI!DVl Source Devices, "INVALID FORMAT" OSD display. Refer to the Manual of = HDMI/DVl Source Devices or contact your sewice center, 5. Check the image on your TV. There may be noise associated with the resofution, vertical pattern, contrast or brightness in PC, HDMtiDVl mode. if noise is present, change the PC or HDMI/DVl mode to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is clear, If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card. 6 Avoid keeping a fixed image on the TV's screen for a long period of time. The fixed image may become permanently imprinted on the screen, 7. The synchronization input form for Horizontal and Vertical frequencies is separate 800x600 1024X768 37:879 4&363 60_31 60,00 25