LG 40LV570H INSTALLATION - Page 12

EZ-Manager Wizard The primary purpose of the EZ-Manager Wizard is to guide you through the process (automated or manual) of configuring the essential Installer Menu items for Pro:Centric operation. The wizard will appear on the screen each time the TV is turned ON, until one of its configuration methods has been completed or the wizard is exited. Use the Installer Remote to make selections and complete each wizard step. While the EZ-Manager Wizard is intended primarily for Pro:Centric-related configuration, the wizard also offers Zoning as well as USB configuration options. • LV570H TVs support the TV Zoning feature, which enables location-specific settings (see Reference section, "Using the TV Zoning Feature," for further information). The EZ-Manager Wizard enables you to set the TV Zone # in the TV as part of the configuration process. • The EZ-Manager Wizard also enables you to access the TV's standard TV Manager / USB Download Menu as part of the configuration process, if desired, to perform USB configuration and/or update functions. Caution: Do NOT unplug the TV power cord or remove the antenna cable or, if applicable, the LAN cable during the configuration process, as doing so will interrupt the current step and may corrupt the configuration data. Before You Begin • If you plan to create a Master TV Setup using the procedure described on pages 34 to 36, be sure to exit the EZ-Manager Wizard in order to avoid setting modes that may restrict the custom setup procedure. See also "Initiate Configuration or Exit the EZ-Manager Wizard" below. • If it has been completed or exited and therefore does not display, the EZ-Manager Wizard can be reactivated; however, this requires that you restore the TV to a factory default condition. See Reference section, "Restoring Factory Defaults on the TV(s)," for further information. • Each wizard step is allotted a time frame after which the wizard proceeds without user interaction. If the Pro:Centric server is configured on the system and if no location-specific settings are required in the TV, for example, TV Zone, Label, and/or Room Number settings, you can simply turn ON the TV, and once initiated, the wizard will proceed through each of the configuration steps with no further user interaction. • If any of the configuration steps fails, you will see a "Diagnostics" screen with an indication of the failure. You will then have the opportunity to reinitiate the configuration process from the previous screen or exit the EZ-Manager Wizard. Initiate Configuration or Exit the EZ-Manager Wizard The Welcome screen provides a brief introduction to the EZ-Manager Wizard. EZ-Manager Wizard Welcome to LG's EZ-Manager Wizard • Use the EZ-Manager Wizard to configure the TV for Pro:Centric operation or to configure the TV using a USB memory device. Select 'Next' to continue. • If a Pro:Centric server will not be installed and/or you do not wish to use the EZ-Manager Wizard to configure this TV, you may exit the wizard. Select 'No Pro:Centric' to disable the Pro:Centric feature of this TV, or select 'Exit' to quit. This setup wizard will start automatically in 10 seconds. No Pro:Centric Exit Next Note: If there is no user action in this screen within 10 seconds, the wizard will proceed to the first configuration step. Once the wizard has proceeded, it is not possible to return to the Welcome screen; however, if you simply wish to exit the wizard, you can do so by selecting the "Exit" option from the subsequent screen(s). 12 206-4317 Draft A.2