LG 40LV570H INSTALLATION - Page 28
MAX BLK HRS Maximum Block Hours
View all LG 40LV570H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Installer Menu (Cont.) 008 - MIN VOLUME (Minimum Volume) This function determines the minimum volume level allowable with the Volume (VOL) Up/Down control. In this way, for example, someone cannot set the volume too low to hear. The value range is from 0 to 63. The factory default is 0, which provides the full range of volume control, if item 009 MAX VOLUME is set to 63. It is recommended to set the same value on every TV. Note: The minimum volume level cannot have a value setting higher than the maximum volume level (described below). 009 - MAX VOLUME (Maximum Volume) This function determines the maximum volume level allowable with the Volume (VOL) Up/Down control. In this way, for example, someone cannot set the volume level high enough to disturb others. The value range is 0 to 63, with 63 as the default, which gives the user the full range of volume control, if item 008 MIN VOLUME is set to 0. It is recommended to set the same value on every TV. Note: The maximum volume level cannot have a value setting lower than the minimum volume level (described above). 010 - MUTE DISABLE Enables or disables sound mute function. If set to 1, sound cannot be muted. If set to 0, sound can be muted. 011 - KEY DEFEAT If set to 1, Key Defeat is enabled, which means that end users cannot access or navigate within the on-screen menu(s) from the display panel; i.e., dome button menu navigation functions will not be available. Set to 0 to disable Key Defeat. Note that all IR features remain functional regardless of this setting; users can always access the TV menus by pressing MENU SETTINGS on the remote. Note: The dome button is only available on 55/65LV570H models. On other LV570H models, a power button at the bottom of the display turns the TV ON or OFF. 015 - SLEEP TIMER If set to 1, the Sleep Timer feature may be used. If set to 0, the Sleep Timer is not available. 016 - EN. TIMER (Enable On/Off Timers) If set to 1, the Timer function is available to the end user and enabled continuously. Set to 0 to disable On/Off timers. Note: The TV clock must be set in order for timers to be used. 017 - ALARM Gives the installer the option of making the Alarm function available to the end user. If set to 1, the Alarm function is available to the end user. Set to 0 to disable the Alarm function. Note: The TV clock must be set before the Alarm function will work. 020 - FEATURE LEVEL Determines an additional IR code scheme to which the TV will respond, allowing for the use of unique IR codes based on "bed number" in a multi-TV single room installation. First determine the IR mode; then select the bed number. Values 0 16 - 24 IR Mode Disabled Multi-code Remote Bed # N/A 1 - 9 Note: For further information, see documentation for the accessory package that includes the multi-code remote. 021 - V-CHIP (Parental Control) Set to 1 to activate V-Chip (Parental Control) and have it available to the end user to filter and control or otherwise restrict programming content that can appear. Set to 0 to turn the V-Chip feature Off (not available to user); no programming restrictions can be set. 022 - MAX BLK HRS (Maximum Block Hours) Sets hours from 0 to 99 for the maximum V-Chip (Parental Control) block hours. Default setting is for 12 blocking hours. Note: This item is not available in the Installer Menu when item 021 V-CHIP is set to 0 or when item 084 PERMANENT BLK is set to 1. 023 - CAPTION LOCK If set to 0, captions are OFF when the TV is turned ON. Set to 1 to use the caption setting configured before the TV was turned OFF when the TV is turned ON. 028 - CH. OVERIDE (Channel Override) This item either allows or restricts tuning of channels that are NOT in the PTC Channel Map. If set to 1, end users can tune channels that are not in the PTC Channel Map by direct keypad entry. If set to 0, users are restricted to only the channels that are in the PTC Channel Map. In the case of CPU-CTV Mode, there are no channels in the PTC Channel Map; therefore, direct keypad entry is not available. Also, when this item is set to 0, the PTC Channel Map (PTC-CTV Mode)/CPU channel lineup (CPU-CTV Mode) is locked, and user access to channel settings in the TV setup menus is restricted. Note: This item is not applicable when the TV is in FTG Mode. 029 - OLD OCV (On Command Video™) Set to 1 to remap the PTC's direct tune channels for Aux inputs from 13x to 9x. This allows 2-digit only tuning systems (i.e., legacy OCV) to direct tune Aux inputs. See also Reference section, "TV Aux Input Configuration." 030 - ACK MASK MPI Communication Parameter. When set to 1, enables ACK feature of MPI. 28 206-4317 Draft A.2