LG DLGX3701W Owners Manual - Page 19
Routing and Connecting Ductwork, Correct Venting, condensation in the ductwork. Ductwork
View all LG DLGX3701W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Routing and Connecting Ductwork NOTE Follow the guidelines below to maximize drying performance and reduce lint buildup and condensation in the ductwork. Ductwork and fittings are NOT included and must be purchased separately. • Use 4-inch (10.2 cm) diameter rigid, semi-rigid or flexible metal ductwork. • The exhaust duct run should be as short as possible. • Use as few elbow joints as possible. • The male end of each section of exhaust duct must point away from the dryer. • Use duct tape on all duct joints. • Insulate ductwork that runs through unheated areas in order to reduce condensation and lint buildup on duct surfaces. • Incorrect or inadequate exhaust systems are not covered by the dryer warranty. Dryer failures or service required because of such exhaust systems will not be covered by the dryer warranty. Correct Venting Incorrect Venting INSTALLATION 19 ENGLISH