LG KG6000R Owners Manual - Page 10

A. Before, Start Installation

Page 10 highlights

A. BEFORE INSTALLATION 1. Insert the guide panels into the guides of the air conditioner. Fasten the curtains to the unit with screws (TYPE A) as shown Fig. 6. 2. Cut the adhesive-back_ seal strip (TYPE D) to the window width, Remove the bacJ

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39

A. BEFORE
INSTALLATION
1. Insert the guide panels
into the guides of the air
conditioner.
Fasten
the curtains
to the unit with
screws (TYPE A) as shown Fig. 6.
2. Cut the adhesive-back_
seal strip (TYPE D) to the
window width,
Remove the bacJ<.ingfrom the seal strip and a_ach
the
seal
strip
to the
underside
of the
bottom
window. (Fig. 7)
B.
NOW
START INSTALLATION
1.
L
OCA TING
UNIT
IN WINDOW
Open the window
and
mark
center
line on the
center of the inner sill, as shown
in
Fig. 8.
TYPEA
2.
A
TTACH
L
BRACKET
a. install
the
L
brackets
behind the
inner
window
sill,
with the short
side
of bracket
as
shown.
Use the 2 screws (TYPE A) provided.
b. The bracket helps to hold unit securely in place.
Be sure to place bracket
edge
flush against back
of inner sill
See Fig. 9.
&
INSTALL
THE
AIR
IN THE WINDOW
a. Carefully
lift the air conditioner
and slide
it
into
the open window. Make sure the bottom guide of
the air conditioner
drops into the notches of the
L bracket. See Fig. 9.
Fig.
8
INNER SILL
OUTER SILL
TYPE A
INSIDE
\'\
LINE
SHORT SIDE
During the following
step, hold unit firmly until
window
sash is lowered to top channel
behind
side panel frames.
Personal
iniury or prope_y
damage
may result if unit falls from window.
IMPORTANT:
When the air conditioner
drops into the
L
bracket, the
air conditioner
will be centered
in window opening
as
shown in Fig. 10.
Fig. 9
L
BRACKET
i
Fig.
i0
I
CENTER LiNE