LG LAN121CNM Service Manual - Page 39
Disassembly
View all LG LAN121CNM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Disassembly Indoor Unit Disconnect the unit from power supply before making any checks. Be sure the power switch is set to "OFF". To remove the Grille from the Chassis. • Open the front panel as shown, and Remove the Securing screws. • Set the up-and-down air discharge louver to open position (horizontally) by finger pressure. • Remove the securing screws. • To remove the Grille, pull the lower left and right side of the grille toward you (slightly tilted) and lift it straight upward. 1. Before removing the control box, be sure to take out the wire screwed at the other end. Disassembly Front panel Earth Conductor Service Manual 39
Service Manual
39
Disassembly
Disassembly
Indoor Unit
Disconnect the unit from power supply before mak-
ing any checks.
Be sure the power switch is set to
“
OFF
”
.
To remove the Grille from the Chassis.
•
Open the front panel as shown, and Remove the
Securing screws.
•
Set the up-and-down air discharge louver to open
position (horizontally) by finger pressure.
•
Remove the securing screws.
•
To remove the Grille, pull the lower left and right
side of the grille toward you (slightly tilted) and lift it
straight upward.
1. Before removing the control box, be sure to
take out the wire screwed at the other end.
Earth
Conductor
Front panel