LG LSC27910ST Owner's Manual (English) - Page 10

USING YOUR REFRIGERATOR ENSURING PROPER AIR CIRCULATION NEXT In order to ensure proper temperatures, air must flow between the refrigerator and freezer sections. As shown in the illustration below, cool air enters through the refrigerator of the freezer section and moves up. Most of the air then flows through the freezer section vents and recirculates under the freezer floor. The rest of the air enters the refrigerator section through the top vent. 1. Clean your refrigerator thoroughly and wipe off dust accumulated during shipping. 2. Install accessories such as ice cube bin, drawers, shelves, etc., in their proper places. They are packed together to prevent possible damage during shipment. 3. Let your refrigerator run for at least 2 or 3 hours before putting food in it. Check the flow of cold air in the freezer compartment to ensure proper cooling. Your refrigerator is now ready for use. CONTROL PANEL FEATURES Display Off Mode • Do not block any of these vents with food packages. If the vents are blocked, airflow will be interruped and temperature and moisture problems may occur. The display lights up and stays lit when the refrigerator is plugged in. You can change the display so that it lights up only when the door is opened. Press "FRZ TEMP" and "ICE PLUS" buttons at the same time for 5 seconds. A tone will sound indicating that the display is Off. Once in Display Off mode, display only lights when door is opened or display button is pressed. Display turns off 30 seconds after door is closed or by pressing display button a second time. Deactivate Display Off Mode in same manner as activation. IMPORTANT: Because air circulates between both sections, any odors formed in one section will transfer to the other. You must thorougly clean both sections to eliminate odors. To prevent odor transfer and drying out food, wrap or cover foods tightly. (See the Food Storage Guide section for details.) Note: If you close the refrigerator forcefully, the freezer door may open and close again due to pressure from internal air flow. REFRIGERATOR AND FREEZER CONTROLS: Initially set the refrigerator and freezer controls to the recommended (middle) settings by pressing (REF.TEMP Graphic) and (FRZ. TEMP Graphic). NOTE: When changing control settings, wait 24 hours before making additional adjustments. After 24 hours, adjust the compartments temperatures as desired. The more lit bars, the colder the refrigerator and freezer will be. 10