LG LSC27910ST Owner's Manual (English) - Page 16

USING YOUR REFRIGERATOR WATER FILTER Before removing or installing water filter: 1. Take out the top shelf and move it to the lowest level. 2. Remove the lamp cover by pressing the tab under the cover and pulling cover to the front. 3. IMPORTANT: Turn off household water supply. Installing the water filter Remove red cap from the filter and insert the two tabs on the filter tip into the two slots in the refrigerator filter receptacle. You should feel the filter entering completely. Turn the filter to the right a quarter turn clockwise to lock it into place. The locked symbol will be lined up with the indicator arrow. Removing the water filter: 1. For first-time installation, remove filter substitute cap (A) by turning it counterclockwise a quarter turn and pulling it down. 2. For subsequent installation, remove old filter by slowly turning it to the left a quarter turn and pulling it down. After installing water filter a) Replace the cover lamp and shelf to the initial position. b) Dispense 2.5 gallons (9.46 L) of water to purge the system (dispense for approximately 5 minutes). Open the refrigerator door and check the shelf area for leaks. c) After installing filter, turn on household water supply. To purchase replacement water filters, call 1-877-714-7486 and ask for replacement part no. 5231JA2002A. A 16