LG LSC27910ST Owner's Manual (English) - Page 7

REFRIGERATOR INSTALLATION HANDLE REMOVAL NOTE: It is ALWAYS recommended to remove the refrigerator doors when it is necessary to move the refrigerator through a narrow opening. If necessary, follow the directions below to remove the door handles. • Loosen the set screws with a 3/32" (2.38 mm) Allen wrench and remove the handle. NOTE: If the handle mounting fasteners need to be tightened or moved, use a 1/4" (6.35 mm) Allen wrench. WARNING Electric Shock Hazard • Disconnect electrical supply to the refrigerator before installing. Failure to do so could result in death or serious injury. • Do not put hands or feet or other objects into the air vents, base grille, or bottom of the refrigerator. You may be injured or receive an electrical shock. • Be careful when you work with the hinge, base grille, and stopper. You may be injured. Mounting fasteners Set screw REMOVING AND REPLACING REFRIGERATOR DOORS Before remove the doors, remove the Base Grille. See BASE GRILLE INSTALLATION for reference. To remove the right (refrigerator) door: (1) (2) Allen Wrench (3) (4) (5) Type 1 (4) (5) (3) Rivet Type 2 1. Open the door. Remove the top hinge cover screw (1). 2. Use a flat blade screwdriver to pry back the hooks (not shown) on the cabinet underside of the cover (2). Lift up the cover. 3. Rotate the hinge lever (3) clockwise. Lift the top hinge (4) free of the hinge lever latch (5). NOTE: Regardless the type of hinge lever (3); type1: without rivet or type 2: with rivet the removal process is the same. 4. Lift the door from the lower hinge pin. 5. Place the door, inside facing up, on a nonscratching surface. CAUTION: When lifting the hinge free of the latch, be careful that the door does not fall forward. 7