LG LSC27910ST Owner's Manual (English) - Page 9

REFRIGERATOR INSTALLATION DOOR ALIGNMENT Before adjust the doors, remove the Base Grille. See BASE GRILLE INSTALLATION for reference. If the freezer compartment door is lower than the refrigerator compartment door, make them level by inserting flat blade screwdriver into the groove of the left leveling leg and rotating it clockwise. Height difference Adjust the level when the refrigerator door is lower than the freezer door during the installation of the refrigerator. Tools you need • Wrench 5/16 in (8 mm) Height difference Keeper nut Wrench Left leveling leg Height difference Height Adjustment Up difference hinge pin Down If the freezer compartment door is higher than the refrigerator compartment door, make them level by inserting flat blade screwdriver into the groove of the right leveling leg and rotating it clockwise. Height difference Height difference Left leveling leg Using a ¾" (19 mm) wrench, turn the keeper nut clockwise to lossen the keeper nut. Using a 5/16" (8 mm) wrench, turn the adjustment hinge pin clockwise or counterclockwise to level the refrigerator and freezer door. After setting the level door, turn the keeper nut counterclockwise to tighten. Do not over tightening the door adjustment screw. The hinge pin can be pulled out. (Adjustable range of height is a maximum of ½" (1.27 cm)). AFTER LEVELING THE DOOR HEIGHT Make sure the front leveling legs are completely touching the floor. 9