LG LSSE3027ST Owners Manual - Page 48
Cleaning the Exterior
View all LG LSSE3027ST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
48 MAINTENANCE Cleaning the Exterior Painted and Decorative Trim For general cleaning, use a cloth with hot soapy water. For more difficult soils and built-up grease, apply a liquid detergent directly onto the soil. Leave it on for 30 to 60 minutes. Rinse with a damp cloth and dry. Do not use abrasive cleaners. Stainless Steel Surfaces To avoid scratches, do not use steel wool pads. 1 Place a small amount of stainless steel appliance cleaner or polish on a damp cloth or paper towel. 2 Clean a small area, rubbing with the grain of the stainless steel if applicable. 3 Dry and buff with a clean, dry paper towel or soft cloth. 4 Repeat as necessary. NOTE •• Do not use a steel wool pad; it will scratch the surface. •• To clean the stainless steel surface, use warm sudsy water or a stainless steel cleaner or polish. •• Always wipe in the direction of the metal surface finish. •• Stainless steel appliance cleaner or polish can be purchased online or from most retailers of appliances or home goods. Front Manifold Panel and Knobs It is best to clean the manifold panel after each use of the range. For cleaning, use a damp cloth and mild soapy water or a 50/50 solution of vinegar and water. For rinsing, use clean water and polish dry with a soft cloth. The control knobs may be removed for easy cleaning. 1 To clean the knobs, make sure that they are in the Off position and pull them straight off the stems. 2 To replace the knobs, make sure that the knobs have the Off position centered at the top, and slide the knobs directly onto the stem. CAUTION •• Do not use abrasive cleansers, strong liquid cleaners, plastic scouring pads or oven cleaners on the manifold panel. Doing so will damage the finish. •• Do not try to bend the knobs by pulling them up or down, and do not hang a towel or other objects on them. NOTE To prevent scratching, do not use abrasive cleaners on any of these materials. Oven Racks Remove the oven racks before operating the self clean cycle. 1 Food spilled into the tracks could cause the racks to become stuck. Clean with a mild, abrasive cleaner. 2 Rinse with clean water and dry. NOTE If the racks are cleaned using the self clean cycle (not recommended), the color will turn slightly blue and the finish will become dull. After the self clean cycle is complete, and the oven has cooled, rub the sides of the racks with wax paper or a cloth containing a small amount of oil. This will make the racks glide more easily into the rack tracks.