LG LTWS24223S Owners Manual - Page 10
How To Reverse And Install The Refrigerator Doors On Some Models
View all LG LTWS24223S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
REFRIGERATOR INSTALLATION HOW TO REVERSE AND INSTALL THE REFRIGERATOR DOORS (on some models) You may find it more convenient to have the doors converted from the left opening type (factory installed) to the right opening type. Directions refer to the right side as the side on your right as you face the unit. 1/4 in 3/8 in 10 mm Hex Socket Wrench TOOLS YOU MIGHT NEED OR USE Phillips Screwdriver No. 2 Flat Head Screwdriver WARNING ELECTRICAL SHOCK HAZARD Before you begin, either unplug the refrigerator or turn off the power at the circuit breaker or fuse box. Remove food and any door rack from the refrigerator. Failure to do so could result in death or serious injury. Move the Hinge Pin Insert Bracket to the other side of the door, keeping the same orientation, and move the Hinge Pin Insert into the hole on the left side of the bracket. 1. Removing Freezer Door Gently pry off the top hinge cover with a flat head screwdriver and remove. Hinge Pin Insert Hinge Pin Insert Bracket Using 10mm or 3/8 inch socket wrench, remove the three bolts and lift off the top hinge. Set parts aside Reverse the Door Closer/Stop by flipping it over. Place it on top of the Hinge Pin Insert Bracket, and tighten both down with the screw. Slightly lift up the refrigerator door and remove it. Middle Hinge Bracket Pry off the cover on the top left side of the refrigerator to uncover the screw holes. Set the freezer door and top hinge parts to the side and remove the refrigerator door. Cover (on top of refrigerator) Hinge Pin Turn the freezer door upside down on a non-scratch surface. Loosen the screw to remove the Door Closer/Stop and Hinge Pin Insert. 8