Home » LG Manuals » Flat Panel Televisions » LG M2362D » Manual Viewer

LG M2362D User Manual - Page 123

Tune Command Command: m a, Auto Con Command: j u

Add to My Manuals
Save this manual to your list of manuals

Page 123 highlights

APPENDIX 17. Auto Configure (Command: j u) G To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 01: To set Ack [u][ ][Set ID][ ][OK/NG][Data][x] * Real data mapping 00 : Step 0 A : Step 10 (Set ID 10) F : Step 15 (Set ID 15) 10 : Step 16 (Set ID 16) 64 : Step 100 6E : Step 110 73 : Step 115 74 : Step 116 C7: Step 199 FE : Step 254 FF : Step 255 18. Tune Command (Command: m a) G Select channel to following physical number. Transmission [m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][Cr] Data 00 : High channel data Data 01 : Low channel data ex. No. 47 -> 00 2F (2FH) No. 394 -> 01 88 (188H), DTV No. 0 -> Don't care Data 02 : 0x00 : ATV, 0x10 : DTV, 0x20 : Radio Channel data range Analogue - Min: 00 ~ Max: 63 (0~99) Digital - Min: 00 ~ Max: 3E7 (0~999) Ack [a][ ][Set ID][ ][OK/NG][Data][x] Data Min: 00 ~ Max: 7DH 19. Programme memory/Skip (Command: m b) G To set skip status for the current Programme. Transmission [m][b][ ][Set ID][ ][Data][Cr] Data 00 : Skip 01 : Memory Ack [b][ ][Set ID][ ][OK/NG][Data][x] 20. Key (Command : m c) G To send IR remote key code. Transmission [m][c][ ][Set ID][ ][Data][Cr] Data Key code - Refer to page 115. Ack [c][ ][Set ID][ ][OK/NG][Data][x] 21. Control Backlight (Command: m g) G To Control the backlight. (Only Auto Bright Off) Transmission [m][g][ ][Set ID][ ][Data][Cr] Data : Min: 00 ~ Max: 64 (*transmit by hexadecimal code) Ack [g][ ][Set ID][ ][OK/NG][Data][x] 22. Input select (Command: x b) (Main Picture Input) G To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data Structure MSB LSB 0000 000 0 External Input Input Number External Input 0000 0001 0010 0100 0110 1000 1001 Data DTV Analogue AV Component RGB DVI HDMI Input Number 0000 0001 0010 Data Input1 Input2 Input3 Ack [b][ ][Set ID][ ][OK/NG][Data][x] 121

Section	Page
OWNER’S MANUAL	1
PREPARATION	3
FRONT PANEL CONTROLS	3
BACK PANEL INFORMATION	4
STAND INSTALLATION	5
<M1962D/M2062D/M2262D/M2362D>	5
<M2762D>	6
DETACHING STAND	7
<M1962D/M2062D/M2262D/M2362D>	7
<M2762D>	8
DETACHING STAND BODY	9
WALL MOUNT: HORIZONTAL INSTALLATION	10
DESKTOP PEDESTAL INSTALLATION	10
POSITIONING YOUR DISPLAY	11
LOCATION	11
SECURING THE SET TO THE WALL TO PREVENT FALLINGWHEN THE SET IS USED ON A STAND	12
ATTACHING THE TV TO A DESK (Only M2762D)	13
KENSINGTON SECURITY SYSTEM	14
EXTERNAL EQUIPMENT SETUP	15
ANTENNA CONNECTION	15
HD RECEIVER SETUP	16
When connecting with a component cable	16
When connecting with a HDMI	17
When connecting with a HDMI to DVI cable	17
DVD SETUP	18
When connecting with a component cable	18
When connecting with a Euro Scart[DVD]	19
When connecting HDMI cable	19
VCR SETUP	20
When connecting with an antenna	20
When connecting with a RCA cable	21
USB SETUP	21
DIGITAL AUDIO OUT SETUP	21
When connecting with a Euro Scart[VCR]	22
INSERTION OF CI MODULE	22
PC SETUP	23
When connecting with a D-sub 15 pin cable	23
When connecting with a DVI cable	24
BACK COVER FOR WIRE ARRANGEMENT	25
WATCHING TV /PROGRAMME CONTROL	27
REMOTE CONTROL KEY FUNCTIONS	27
TURNING ON THE TV	29
PROGRAMME SELECTION	30
VOLUME ADJUSTMENT	30
QUICK MENU	31
ON SCREEN MENUS SELECTION AND ADJUSTMENT	32
AUTO PROGRAMME TUNING	33
MANUAL PROGRAMME TUNING (IN DIGITAL MODE)	34
MANUAL PROGRAMME TUNING (IN ANALOGUE MODE)	35
PROGRAMME EDIT	37
IN DTV/RADIO MODE	38
IN TV MODE	39
SOFTWARE UPDATE	40
DIAGNOSTICS (IN DIGITAL MODE ONLY)	41
CI [COMMON INTERFACE] INFORMATION	42
SELECTING THE PROGRAMME TABLE	43
EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)	44
Switch on/off EPG	44
Select a programme	44
Button Function in NOW/NEXT Guide Mode	45
Button Function in 8 Day Guide Mode	45
Button Function in Date Change Mode	46
Button Function in Extended Description Box	46
Button Function in Date Change Mode	46
Button Function in Extended Description Box	46
Button Function in Record/Remind Setting Mode	47
Button Function in Schedule List Mode	47
PICTURE CONTROL	48
PICTURE SIZE (ASPECT RATIO) CONTROL	48
AUTO BRIGHT	50
PRESET PICTURE SETTINGS	51
Picture Mode-Preset	51
Auto Colour Tone Control (Warm/Medium/Cool)	52
Auto Colour Tone Control (6500K/9300K)(RGB,DVI mode only)	53
MANUAL PICTURE ADJUSTMENT	54
PICTURE IMPROVEMENT TECHNOLOGY	55
ADVANCED - BLACK (DARKNESS) LEVEL	56
ADVANCED - FILM MODE	57
Expert Picture Control	58
PICTURE RESET	60
SCREEN SETUP FOR PC MODE	61
Selecting Resolution	61
Auto Configure (RGB [PC] mode only)	62
Adjustment for screen Position, Size, Phase	64
Screen Reset	65
SOUND CONTROL	66
AUTO VOLUME LEVELER	66
CLEAR VOICE II	67
BALANCE	68
PRESET SOUND SETTINGS - SOUND MODE	69
SOUND SETTING ADJUSTMENT - USER MODE	70
SRS TRUSURROUND HD	70
AUDIO RESET	71
SELECTING DIGITAL AUDIO OUT	72
TV SPEAKERS ON/ OFF SETUP	73
AUDIO DESCRIPTION(IN DIGITAL MODE ONLY)	74
I/II	75
Stereo/Dual Reception (In Analogue Mode Only)	75
NICAM Reception (In Analogue Mode Only)	76
Speaker Sound Output Selection	76
TIME SETTING	77
CLOCK SETUP	77
AUTO ON/OFF TIMER SETTING	78
AUTO SHUT-OFF SETTING	79
SLEEP TIMER SETTING	80
OPTION SETTING	81
ON-SCREEN MENU LANGUAGE /COUNTRY SELECTION	81
LANGUAGE SELECTION (IN DIGITAL MODE ONLY)	82
DATA SERVICE	83
INPUT LABEL	84
KEY LOCK	85
POWER INDICATOR	86
DDC CI(Only RGB, DVI mode)	87
MODE SETTING	88
Initializing(Reset to original factory settings)	89
PARENTAL CONTROL / RATINGS	90
SET PASSWORD & LOCK SYSTEM	90
BLOCK PROGRAMME	91
PARENTAL CONTROL (IN DIGITAL MODE ONLY)	92
INPUT BLOCK	93
TO USE A USB DEVICE	94
When connecting a USB device	94
PHOTO LIST	95
Screen Components	95
Photo Selection and PopUp Menu	96
Set up the menu in Full-Sized Screen	97
MUSIC LIST	99
Screen Components	99
Music Selection and PopUp Menu	100
TELETEXT	102
SWITCH ON/OFF	102
SIMPLE TEXT	102
TOP TEXT	102
FASTEXT	103
SPECIAL TELETEXT FUNCTIONS	103
DIGITAL TELETEXT	104
TELETEXT WITHIN DIGITAL SERVICE	104
TELETEXT IN DIGITAL SERVICE	104
APPENDIX	105
TROUBLESHOOTING	105
MAINTENANCE	108
PRODUCT SPECIFICATIONS	109
<M1962D>	109
<M2062D>	110
<M2262D>	111
<M2362D>	112
<M2762D>	113
PROGRAMMING THE REMOTE CONTROL	114
PROGRAMMING CODE	114
IR CODES	116
EXTERNAL CONTROL DEVICE SETUP	118
RS-232C Setup	118
Type of Connector; D-Sub 9-Pin Male	118
RS-232C Configurations	118

Match case Limit results 1 per page

121

20. Key (Command : m c)

To send IR remote key code.

Transmission

Data

Key code - Refer to page 115.

[m][c][

][Set ID][

][Data][Cr]

Ack

[c][

][Set ID][

][OK/NG][Data][x]

21. Control Backlight (Command: m g)

To Control the backlight.

(Only Auto Bright Off)

Transmission

Data

: Min: 00

Max: 64 (*transmit by hexadecimal code)

[m][g][

][Set ID][

][Data][Cr]

Ack

[g][

][Set ID][

][OK/NG][Data][x]

APPENDIX

Real data mapping

00 : Step 0

: Step 10 (Set ID 10)

:Step 15 (Set ID 15)

10:Step 16 (Set ID 16)

64: Step 100

6E: Step 110

73 : Step 115

74 : Step 116

C7: Step 199

FE : Step 254

FF : Step 255

17. Auto Configure (Command: j u)

To adjust picture position and minimize image shaking

automatically. It works only in RGB (PC) mode.

Transmission

Data

01: To set

[j][u][

][Set ID][

][Data][Cr]

Ack

[u][

][Set ID][

][OK/NG][Data][x]

18. Tune Command (Command: m a)

Select channel to following physical number.

Transmission

Data 00 : High channel data

Data 01 : Low channel data

ex.

No. 47 -> 00 2F (2FH)

No. 394 -> 01 88 (188H),

DTV No. 0 -> Don’t care

Data 02 : 0x00 : ATV, 0x10 : DTV, 0x20 : Radio

Channel data range

Analogue - Min: 00

Max: 63 (0

99)

Digital - Min: 00

Max: 3E7 (0

999)

[m][a][

][Set ID][

][Data0][

][Data1][

][Data2][Cr]

Ack

[a][

][Set ID][

][OK/NG][Data][x]

Data

Min: 00

Max: 7DH

19. Programme memory/Skip (Command: m b)

To set skip status for the current Programme.

Transmission

Data

00 : Skip

01 : Memory

[m][b][

][Set ID][

][Data][Cr]

Ack

[b][

][Set ID][

][OK/NG][Data][x]

22. Input select (Command: x b)

(Main Picture Input)

To select input source for main picture.

Transmission

Data Structure

MSB

LSB

[x][b][

][Set ID][

][Data][Cr]

Ack

[b][

][Set ID][

][OK/NG][Data][x]

External Input

Data

Analogue

DTV

Component

RGB

DVI

HDMI

External Input

Input Number

Data

Input1

Input3

Input2