LG WM1455HVA Owners Manual - Page 14

us_main.book.book Page 14 Friday, March 6, 2020 10:25 AM 14 INSTALLATION bracket, mold or microorganisms could spread to the inside of the washer. more than necessary can cause the washer to vibrate. 4 " (10 cm) 2 Hang the end of the drain hose over the side of the laundry tub. NOTE • Before installing the washer, make sure that the floor is clean, dry and free of dust, dirt, water and oil so the washer feet cannot slide easily. Feet that move or slide on the floor can contribute to excessive vibration and noise. How to Level the Washer 1 Position the washer in its final location. • Take special care not to pinch, strain, or crush the water and drain hoses. If you have a carpenter's level a, you can use it to check that the washer is level. The slope beneath the washer should not exceed 1 inch, and all 4 leveling feet must rest firmly on the floor. 3 Use the provided tie strap to secure the drain hose in place. 2 Adjust the leveling feet. • Turn all 4 leveling feet in one direction to raise the washer or the other direction to lower it. Leveling the Washer The drum of the washer spins at very high speeds. To minimize vibration, noise, and unwanted movement, the floor must be a solid, level surface. CAUTION • Using the washer without leveling it may cause excess vibration and noise, leading to a washer malfunction. • Adjust the leveling feet only as far as necessary to level the washer. Extending the leveling feet 3 Check the level again. • Push or rock the top edges of the washer gently to make sure the washer does not rock. If the washer rocks, readjust the leveling feet.