LG WM1455HVA Owners Manual - Page 38
Cleaning the Drain Pump Filter
View all LG WM1455HVA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
us_main.book.book Page 38 Friday, March 6, 2020 10:25 AM 38 MAINTENANCE 7 Flush then reattach the water hoses. • Before reattaching the water inlet hoses, flush them by running several gallons of water through them into a bucket or drain, preferably with the faucets wide open for maximum flow. NOTE • An IE error message may blink on the display when the water pressure is low or an inlet filter is clogged with dirt. Clean the inlet filter. Cleaning the Drain Pump Filter The washer fails to drain if the drain pump filter is clogged. Periodically clean the drain filter to prevent clogging with foreign objects. WARNING • Opening the drain filter will result in water overflowing if there is water in the drum. Use a bucket if the drum is not completely drained before you open the drain filter. • Using the washer without the drain filter or with an incorrectly assembled drain filter may cause leaks or malfunction of the washer. 1 Turn off the washer, and unplug the power cord. 2 Open the drain pump filter cover. 4 Remove the pump filter. • Twist the pump filter counterclockwise to remove. 5 Clean the pump filter and opening. 6 Reassemble the plug onto the drain hose and reclip the drain hose. 3 Drain any remaining water. • Unclip the drain hose and remove the plug from the drain hose to drain the remaining water. 7 Insert the drain pump filter.