LG WM2677HSM Owners Manual - Page 17

Maintenance - pump

Page 17 highlights

MAINTENANCE : :: : Bel'ore cleaning the washer interior, unplug the electrical power cord to avoid electrical shock hazards. When disposing ol'the appliance, cut offthe power cable, destroy the plug, and disable the door lock to prevent young children from being trapped inside° = The water inlet filter •" IE "error message will blink on the controt panel when water does not enter the dispenser - 1!your water is very hard or contains traces of lime deposit, the water inlet filter may become clogged We recommend cleaning it every few months 1..Turn off the 2. Unscrew water tap the water inlet hose 3. Clean the filter using a hard bristle brush -- 4_Tighten the inlet hose = The drain pump filter • The drain filter collects threadsand small objects left in the taundry. Check regularlythat the filter is cleanto ensure smoothrunning of your machine. • Allow the water to coot down before cleaning the drain pump filter 1..Open the lower cover cap (# with a too! such as coin Turn the drain plug @:t,o pull out the hose.. 2. Unplug lhe drain plug _.%, allowing the water to flow out At thistime use a vessel to prevent water from flowing onto the floor When water does not flow any more, turn the pump filter (._)open to the left & Remove any foreign objects from the pump filter _3.)After c_eaning, turn the pump filter (_'_clockwise and insertthe drain plug (_) to the origina[ place Close the lower cover cap,_'_ 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

MAINTENANCE
:
::
:
Bel'ore cleaning
the
washer
interior, unplug the electrical
power cord
to avoid
electrical
shock
hazards.
When disposing
ol'the appliance,
cut offthe
power cable,
destroy
the
plug,
and
disable the door lock to prevent
young children
from being trapped inside°
= The
water inlet
filter
•"
IE "error
message will blink on the controt panel
when water
does not enter
the
dispenser
-
1!
your water is very hard
or
contains traces of lime deposit, the water inlet filter may become clogged
We recommend cleaning
it
every few months
1..Turn off the
2.
Unscrew
water tap
the water
inlet
hose
3.
Clean the
filter using
a hard
bristle
brush
--
4_Tighten
the
inlet
hose
= The
drain pump
filter
• The drain filter collects
threads
and small objects left
in
the
taundry.
Checkregularlythatthefilter
is
cleanto ensure smoothrunning of your machine.
• Allow
the
water
to coot down
before
cleaning
the
drain
pump
filter
1..Open
the
lower cover
cap
(#
with
a
too! such
as
coin
Turn the drain plug @:,
to pull
out the hose..
2.
Unplug lhe drain plug _.%,
allowing the
water
to flow out
At
thistime
use a vessel to
prevent water from flowing
onto
the
floor When water does
not flow any more, turn the
pump filter (._)
open to the
left
& Remove any foreign objects from
the pump filter _3.)After
c_eaning,
turnthe pump filter (_'_clockwise
and
insert
the drain plug (_) to
the
origina[
place
Close the lower
cover cap,_'_
17