LG WM2677HSM Owners Manual - Page 6

I,N,..%...T. All ___A.vT..I{3N INSTRUCTIONS = Installation clearances The location must be iarge enough to fully open the washer door. ,. Washer dimensions !i _ ii (75 6 cm) (10 crn) [Side Vie'.'.,] • Most installations require a minimum 4 in, (10 cm) clearance behind the washer = Minimum installation spacing for recessed area installation. The following dimensions shown are for the minimum spacing altowed Additional spacing should be considered for instaIMtionand servicing . Additional clearances might be required for wall, door and floor moldings • Additional spacing of I in. (2 5 cm) on all sides of the washer is recommended to reduce noise transfer Companion appliance spacing should also be considered 6 (2 5 cm) (68 Scm) (Front view) (2 5 cry) = Level floor • Allowable slope under entire washer is 1°.. • To minimize noise and vibration, the washer MUST be Installed on a solidly constructed floor. • Carpeting and soft tile surfaces are not recommended. • Never install the washer on a platlorm or weakly supported structure NOTE: A firm_ solid floor is even (gore critical to a front*leadlng ,._asher than to a lop-loader. Iflyour flour is wood and!or ff'ame construction, you may need to reinforce il, Front-loaders use substantially faster spin speeds than top-loaders, causing greater vibration. If the floor is not solid, yuur washer will vibrate, You will hear and feel lhe vibration throughout your house. - Power outlet • Must be within 60 in (1 5 m) of either side of the washer,. Do not overload the outlet with more than one appliance • T_me-delay fuse or circuit breaker is recommended NO]'E: It is the personal t'esponsibility and obligation of the eu_omer to have a proper outlet installed by a qualified electrician,