LG WM2677HSM Owners Manual - Page 22
Solution - troubleshooting
View all LG WM2677HSM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
TROUBLESHOOTING GUIDE Problem Possible Cause Solution - Water supply is not adequate in area • Water supply taps are not completely open • Water inlet hose is bent • The filter of the inlet hose clogged Check another tap in the house Fully open tap Straighten hose Check the filter of the inlet hose • Drain hose is bent or clogged • The drain filter is clogged Clean and straighten the drain hose Clean the drain filter • Load is too smaIL • Load is out of balance • The appliance has an imbalance detection and correction system ff individual heavy articles are loaded (bath mat, bath robe, etc ) and the imbalance is too great, after several atlempts to restart the spin cycle the machine wilt stop and the error code will be displayed Add t or 2 similar items 1o help balance the toad Rearrange load to aIlow proper spinning • Is the door opened or not completely closed? • The water overfills due to the faulty water valve • The water level sensor malfunction Close the door completely =_ If dE is not released, call for service Unplug the power plug and call for service Close the water tap Unplug the power plug Call for service • Overload in motor • Overload in motor • The washer experienced a power failure Restart the cycle 22