LG WM2677HSM Owners Manual - Page 7

INSTALLATION INSTRUCTIONS = Electrical connection - Do not use an extension cord or double adapter • If the supply cord is damaged, it must be replaced by a qualified person in order to avoid a hazard • If the machine will not be used for an extended time, unplug it and shut off the water supply • Connect the machine to a grounded outlet in accordance with current wiring regulations - The appliance must be positioned so that the plug is easily accessible CAUTION! Concerning the Power Cord Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appfiance and has no additianat outlets or branch circuits. Check the specification page of this owner's manual to be certain, Do not overload wall cutlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wlre insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodk',ally examine the cord of your appliance, and if its appearance indicates damage or detedoratJom unplug it, discontinue use of the appliance, and have the cord repfaced with an exact replacement part by an authorized servicer Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed [na door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance, = Connecting water supply hose Cold water tap -Water supply pressure must be between 45 and 145 PSI (30-1000 kPa), Do not crossthread when connecting inlet hose to the valve. If the water supply pressure is more than 145 PSI, a pressure reducing device should be installed Two Sealing washers are supplied with the water inlet hoses to prevent water leaks. Check for leakage of washing machine connections by turningthe tap completely on Periodically check the condition of the hose and replace the hose if necessary Make sure that there is no kink in the hose and that it is not crushed Be sure that the two water input ports are connected to the correct water fatJcets..The connector for hot water is colored red NOTE: Washing Machine is to be connected to lhe water mains using new hos_. Old hoses should eel be used, Repairs to the washing machine mus! only be carried out by qualified personnel, Repairs carried out by inexperienced persong may cilllse injury or serious malhmctioning. Contact your local service eentero i)o net instal! your washing machine in a room where temperatures below freezing may occur° Frozen hoses may burst antler pressure° The r¢liabillty of the elee|reaic control unit may be impaired at lemperatures below the freezing point, If the applinnce is delivered in the winter months and temperatures are below fre_ing_ store |he washing machine at room temperature for a few hours hehwe putting it into operatiom 7