LG WM3431HW Owner's Manual - Page 23
Straighten hose. - error codes
View all LG WM3431HW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
T roubleshooting guide Problem Possible Cause • Water supply is not adequate in area. • Water supply taps are not completely open. • Water inlet hose is bent. • The filter of the inlet hose clogged. • Drain hose is bent or clogged. • The drain filter is clogged. • Load is too small. • Load is out of balance. • The appliance has an imbalance detection and correction system. If individual heavy articles are loaded (bath mat, bath robe, etc.) and the imbalance is too great, after several attempts to restart the spin cycle the machine will stop and the error code will be displayed. • Is the door opened or not completely closed? • The water overfills due to the faulty water valve. • The water level sensor malfunction. Solution Check another tap in the house. Fully open tap. Straighten hose. Check the filter of the inlet hose. Clean and straighten the drain hose. Clean the drain filter. Add 1 or 2 similar items to help balance the load. Rearrange load to allow proper spinning. Close the door completely. If " " is not released, call for service. Unplug the power plug and call for service. Close the water tap. Unplug the power plug. Call for service. • Overload in motor. • Overload in motor. • Check water supply. 22 Turn the tap on I f " " is not released, unplug power plug and call service.