LG WM3431HW Owner's Manual - Page 6
nstallation - cleaning
View all LG WM3431HW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
I nstallation Install or store unit where it will not be exposed to temperatures below freezing or exposed to outside weather conditions. Properly ground washer to conform with all governing codes and ordinances. To reduce the risk of electric shock, do not install the washer in humid spaces. The base opening must not be obstructed by carpeting when the washing machine is installed on a carpeted floor. In areas where there are areas which may be subject to infestation by cockroaches or other vermin, pay particular attention to keeping the appliance and its surroundings in clean condition at all times. Damage caused by cockroaches or other vermin will not be covered by the appliance warranty. Shipping bolts The appliance is fitted with shipping bolts to prevent internal damage during transport. Removing shipping bolts 1. To prevent internal damage during transport, 3. Take out the 4 bolts by twisting the braces 4 locking bolts are installed. Before operating slightly. Keep the 4 bolts and the wrench for the washer, remove the bolts. future use. • If they are not removed, it may cause severe • Whenever the appliance is transported, the vibration, noise, and malfunction. shipping bolts must be replaced. 2. Unscrew the 4 bolts with the wrench supplied. cap 4. Close the holes with the caps supplied. 5