Lantronix EDS16PR EDS - User Guide - Page 25
: Installation of EDS8PS and EDS16PS, Package Contents, User-Supplied Items
View all Lantronix EDS16PR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
3: Installation of EDS8PS and EDS16PS This chapter describes how to install the EDS8PS and EDS16PS device servers. Package Contents Your EDS package includes the following items: One EDS device server (EDS8PS or EDS16PS) One RJ45-to-DB9F serial cable One power cord User-Supplied Items To complete your EDS8/16PS installation, you need the following items: RS-232 serial devices that require network connectivity. Each EDS8/16PS serial port supports a directly connected RS-232 serial device. A serial cable for each serial device to be connected to the EDS8/16PS. All devices attached to the device ports support the RS-232C (EIA-232) standard. Category 5 cabling with RJ45 connections is used for the device port connections. Note: To connect an EDS8/16PS serial port to a DTE device, you need a DTE cable, such as the one supplied in your EDS8/16PS package, or an RJ45 patch cable and DTE adapter. To connect the EDS8/16PS serial port to a DCE device, you need a DCE (modem) cable, or an RJ45 patch cable and DTE adapter. For a list of the Lantronix cables and adapters you can use with the EDS8/16PS, see the Appendix D - Lantronix Cables and Adapters (on page 158). An available connection to your Ethernet network and an Ethernet cable. A working power outlet. EDS User Guide 25