Lantronix EDS16PR EDS - User Guide - Page 78
Host Configuration, To con a selected remote host, Submit
View all Lantronix EDS16PR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
10: Terminal and Host Settings Host Configuration This Host web page is where you may view and modify current settings for a selected remote host. To configure a selected remote host: 1. Select Host on the menu bar. The Host web page appears. 2. Select a specific host number at the top of the page. The Host Configuration page for the selected host appears. Figure 10-5 Host Configuration 3. Enter or modify the following settings: Host Settings Name Protocol SSH Username Remote Address Remote Port Table 10-6 Host Configuration Description Enter a name for the host. This name appears on the Login Connect Menu. To leave a host out of the menu, leave this field blank. Select the protocol to use to connect to the host. Choices are: Telnet SSH Note: SSH keys must be loaded or created on the SSH page for the SSH protocol to work. Appears if you selected SSH as the protocol. Enter a username to select a pre-configured Username/Password/Key (configured on the SSH: Client Users page), or leave it blank to be prompted for a username and password at connect time. Enter an IP address for the host to which the device will connect. Enter the port on the host to which the device will connect. 4. Click Submit to save changes. 5. Repeat above steps as desired, according to additional host(s) available on your product. EDS User Guide 78