Lantronix EDS32PR EDS - User Guide - Page 120
IP Address Filter, To con the IP address filter, IP Address Filter Settings, Remove
View all Lantronix EDS32PR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
14: Maintenance and Diagnostics Settings IP Address Filter The IP address filter specifies the hosts and subnets permitted to communicate with the EDS device. When the filter list is empty, then all IP addresses are allowed. Note: If using DHCP/BOOTP, ensure the DHCP/BOOTP server is in this list. To configure the IP address filter: 1. Select IP Address Filter on the menu bar. The IP Address Filter page opens to display the current configuration. Figure 14-14 IP Address Filter Configuration Note: If you enter any filter, be careful to make sure that your network IP address is covered. Otherwise you will loose access to the EDS. You will have to then access the EDS from a different computer to reset the configuration. 2. Enter or modify the following settings: IP Address Filter Settings IP Address Network Mask 3. Click Add. Table 14-15 IP Address Filter Settings Description Enter the IP address to add to the IP filter table. Enter the IP address' network mask in dotted notation. Note: In the Current State table, click Remove to delete any existing settings, as necessary. EDS User Guide 120