Lantronix EDS32PR EDS - User Guide - Page 76
Terminal on Line 1 Configuration, Submit, Terminal Type, send break, start echoing, Login Connect Menu
View all Lantronix EDS32PR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
10: Terminal and Host Settings Terminal on Line Configuration Settings Terminal Type Login Connect Menu Exit Connect Menu Send Break Break Duration Echo Table 10-2 Terminal on Line 1 Configuration Description Enter text to describe the type of terminal. The text will be sent to a host via IAC. Note: IAC means, "interpret as command." It is a way to send commands over the network such as send break or start echoing. Select the interface to display when the user logs in. Choices are: Enabled = shows the Login Connect Menu. Disabled = shows the CLI Select whether to display a choice for the user to exit the Login Connect Menu and reach the CLI. Choices are: Enabled = a choice allows the user to exit to the CLI. Disabled = there is no exit to the CLI. Enter a Send Break control character, e.g., Y, or blank to disable. When the Send Break control character is received from the network on its way to the serial line, it is not sent to the line; instead, the line output is forced to be inactive (the break condition). Enter how long the break should last in milliseconds. Applies only to Connect Mode Telnet connections, not to Accept Mode. Only disable Echo if your terminal echoes, in which case you will see double of each character typed. 4. Click Submit to save changes. 5. Repeat above steps as desired, according to the additional line(s) available on your product. EDS User Guide 76