Lantronix EDS32PR EDS - User Guide - Page 74

9: Line and Tunnel Settings Figure 9-21 Tunnel 1 Modem Emulation 4. Enter or modify the following settings: Table 9-22 Tunnel Modem Emulation Tunnel- Modem Emulation Settings Echo Pluses Echo Commands Verbose Response Response Type Error Unknown Commands Incoming Connection Connect String Display Remote IP Description Select Enabled to echo +++ when entering modem Command Mode. Select Enabled to echo the modem commands to the console. Select Enabled to send modem response codes out on the serial line. Select the type of response code: Text or Numeric. Select whether an ERROR or OK response is sent in reply to unrecognized AT commands. Choices are:  Enabled = ERROR is returned for unrecognized AT commands.  Disabled = OK is returned for unrecognized AT commands. Default is Disabled. Select whether Incoming Connection requests will be disabled, answered automatically, or answered manually. Default is Disabled. Enter the connect string. This modem initialization string prepares the modem for communications. It is a customized string sent with the "CONNECT" modem response code. Selects whether the incoming RING sent on the Serial Line is followed by the IP address of the caller. Default is Disabled. 5. Click Submit. 6. Repeat above steps as desired, according to additional tunnel(s) available on your product. EDS User Guide 74