Lantronix IntelliBox-I/O IntelliBox-I/O - Command Reference - Page 12
Command Line Interface, IntelliBox-I/O 2100 Command Reference, CLI Level Hierarchy
View all Lantronix IntelliBox-I/O manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
3: Command Line Interface (login) enable Figure 3-1 CLI Level Hierarchy chem configure device filesystem io line lpd ssh ssl tunnel accept connect disconnect modem packing serial arp cli eventtrak (number) ftp host http icmp if 1 ip ip filter lpd modbus query port rss snmp syslog tcp terminal tftp udp match task ethernet link Commands at the login level, shown in Figure 3-2, do not affect current configuration settings and are not displayed initially. If you type , you will see the login sub-commands. These commands provide diagnostic and status information only. Figure 3-2 Login Level Commands >? clrscrn exit ping show show ibio2100 > enable ping ping show history trace route IntelliBox-I/O 2100 Command Reference 12
3: Command Line Interface
IntelliBox-I/O 2100 Command Reference
12
Figure 3-1
CLI Level Hierarchy
Commands at the login level, shown in
Figure 3-2
, do not affect current configuration settings and
are not displayed initially. If you type <
?
>, you will see the login sub-commands. These commands
provide diagnostic and status information only.
Figure 3-2
Login Level Commands
>?
clrscrn
enable
exit
ping <host>
ping <host> <count>
ping <host> <count> <timeout>
show
show history
show ibio2100
trace route <host>
>
(login)
enable
ssh
ethernet link
if 1
lpd <number>
rss
line <line>
io
chem
<number>
configure
modbus
device
filesystem
lpd
ip
arp
eventtrak
(number)
ftp
host <number>
http
ip filter
query port
terminal
<number>
tcp
snmp
syslog
tunnel <line>
accept
connect
disconnect
modem
packing
serial
icmp
cli
match
<number>
task <number>
udp
tftp
ssl