Lantronix IntelliBox-I/O IntelliBox-I/O - Command Reference - Page 61
disconnect tunnel-disconnect:2 level commands, show upload
View all Lantronix IntelliBox-I/O manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
5: Commands and Levels auto show tlog auto show upload clrscrn cpu speed default cpu speed default long name default short name exit long name short name show show buffer pool show codefile memory show delta memory show hardware information show history show ibio2100 show linereference memory show memory show task memory show task state show tlog show upload write disconnect (tunnel-disconnect:2) level commands character stop disable character stop enable clrscrn exit flush serial disable flush serial enable modem control disable modem control enable no timeout show show history timeout write Continuously displays the internal trouble log. Continuously displays the status of firmware upload. Clears the screen. Sets the CPU speed. Restores the default CPU clock rate. Restores the default product long name. Restores the default product short name. Exit to the enable level. Sets the product long name, displayed in command mode and the Web interface. Sets the product short name, displayed in command mode and the Web interface. Show system information Displays information about the various buffer pools. Displays memory utilization by code files. Displays differences in memory utilization by code files or line reference. Displays information about the hardware. Displays the last 20 commands entered during the current CLI session. Show system information Displays memory utilization by line reference for one code file. Displays current memory usage information. Displays task memory utilization. Displays current task states. Displays the internal trouble log. Displays the status of firmware upload. Stores the current configuration in permanent memory. Does not watch for a stop character to disconnect. Watches for a stop character to disconnect. Clears the screen. Returns to the tunnel level. Does not flush serial data upon closing a tunneling connection. Flushes serial data buffer when a tunneling connection is closed. Does not watch the modem control pin to disconnect. Watches the modem control pin and disconnects if it is not asserted. Disables disconnect after timeout feature for tunneling sessions. Displays the current configuration. Displays the last 20 commands entered during the current CLI session. Disconnects when no data has been received on the line (serial port) for the Stores the current configuration in permanent memory. IntelliBox-I/O 2100 Command Reference 61