Lantronix IntelliBox-I/O IntelliBox-I/O - Command Reference - Page 65
Unzeros FTP counters.
View all Lantronix IntelliBox-I/O manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
file> touch ftp (config-ftp) level commands admin password admin username clear counters clrscrn default admin password default admin username exit no clear counters show show history state disable state enable write host 1 (config-host:1) level commands clrscrn default protocol default remote port exit host name no name no remote address no ssh username protocol ssh protocol telnet remote address remote port show show history ssh username write host 2 (config-host:2) level commands clrscrn default protocol default remote port exit host name no name IntelliBox-I/O 2100 Command Reference 5: Commands and Levels Create a file Sets the administrative password for the FTP server. Sets the administrative username for the FTP server. Zeros FTP counters. Clears the screen. Resets the FTP password to the default (PASS). Resets the FTP username to the default (admin). Returns to the config level. Unzeros FTP counters. Displays the FTP settings and statistics. Displays the last 20 commands entered during the current CLI session. Disables the FTP server. Enables the FTP server. Stores the current configuration in permanent memory. Clears the screen. Restores the default value of the protocol (Telnet). Sets the remote port (used to connect to the host) to the default value, Exits to the configuration level. Change to config host level Sets the name of the host. Clears the name of the host. Clears the remote address of the host. Clears the SSH username associated with the host. Sets the protocol to SSH. Sets the protocol to Telnet. Sets the IP address of the remote host to connect to when this host is Sets the remote port used to connect to the host. Displays the current configuration. Displays the last 20 commands entered during the current CLI session. Sets the username for logging into the host via SSH. Stores the current configuration in permanent memory. Clears the screen. Restores the default value of the protocol (Telnet). Sets the remote port (used to connect to the host) to the default value, Exits to the configuration level. Change to config host level Sets the name of the host. Clears the name of the host. 65