Lantronix Micro Embedded Integration Kit (EIK) - User Guide - Page 35

Using Setup Mode for Configuration Disable Web Server This setting defaults to the N (No) option. The Y (Yes) option disables the web server. Disable ECHO Ports This setting controls whether the serial port echoes characters it receives. Enable Enhanced Password This setting defaults to the N (No) option, which allows you to set a 4-character password that protects Setup Mode by means of Telnet and web pages. The Y (Yes) option allows you to set an extended security password of 16-characters for protecting Telnet access. Factory Defaults Select 7 to reset the unit's Channel 1, Channel 2, Expert Settings, and Enhanced Security to the factory default settings. The server configurations (IP address information) remain unchanged. Channel 1 and 2Configuration Baudrate 9600 I/F Mode 4C (1 stop bit, no parity, 8 bit, RS-232C) Own TCP port number Channel 1: 10001 Channel 2: 10002 Connect Mode C0 (always accept incoming connection; no active connection startup) Hostlist retry counter 3 Hostlist retry timeout 250 (msec) Start character for serial channel 1 0x0D (CR) All other parameters 0 Expert Settings TCP keepalive ARP cache timeout 45 (seconds) 600 (seconds) Security Settings SNMP SNMP community name Telnet setup TFTP download Port 77Feh Web Server ECHO Encryption Enhanced password Enabled Public Enabled Enabled Enabled Enabled Disabled Disabled Disabled 4-18 Embedded Integration Kit User Guide