Lantronix PremierWave 2050 User Guide - Page 58

Syslog, To Con Syslog Settings, Using Web Manager, Using CLI, Using XML, System

Page 58 highlights

7: Administration Syslog The system log (Syslog) provides information that shows the current configuration and statistics of the Syslog. You can configure the syslog host and set the severity level for events to log. Note: The system log is saved to local storage, but it is not retained through reboots unless diagnostics logging to the file system is enabled. To allow the administrator to save the complete system log, save the system log to a server that supports remote logging services. For details, refer to RFC 3164. The default port is 514. To Configure Syslog Settings Using Web Manager 1. In the Web Manager, click the Administration tab. 2. Click Syslog. 3. To enable Syslog, for State, select Enabled. 4. For Host, type the IP address of the remote server that stores the logs. 5. For Remote Port, enter the port number for the remote host that supports logging services. The default port number is 514. 6. For Severity Log Level, click the arrow to select the minimum level message type that you want the system to log. 7. Click Submit. Using CLI  To enter the FTP command level: enable -> configure -> syslog Using XML  Include in your file:

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65

7: Administration
PremierWave® 2050 Enterprise Wi-Fi® IoT Module User Guide
58
Syslog
The system log (Syslog) provides information that shows the current configuration and statistics of
the Syslog. You can configure the syslog host and set the severity level for events to log.
Note:
The system log is saved to local storage, but it is not retained through reboots
unless diagnostics logging to the file system is enabled. To allow the administrator to save
the complete system log, save the system log to a server that supports remote logging
services. For details, refer to RFC 3164. The default port is 514.
To Configure Syslog Settings
Using Web Manager
1.
In the Web Manager, click the
Administration
tab.
2.
Click
Syslog
.
3.
To enable Syslog, for
State
, select Enabled.
4.
For
Host
, type the IP address of the remote server that stores the logs.
5.
For
Remote Port
, enter the port number for the remote host that supports logging services.
The default port number is 514.
6.
For
Severity Log Level
, click the arrow to select the minimum level message type that you
want the system to log.
7.
Click
Submit
.
Using CLI
To enter the FTP command level:
enable -> configure -> syslog
Using XML
Include in your file:
<configgroup name="syslog"
System
PremierWave 2050 module settings allow for rebooting the device, restoring factory defaults,
uploading new firmware and updating a system’s short and long name.
Note:
Anytime you reboot the unit, this operation will take some time to complete.
Please wait a minimum of 10-20 seconds after rebooting the unit before attempting to
make any subsequent connections.
Table 7-13
System Settings
System Settings
Description
Reboot Device
Click the
Reboot
button to reboot the device.
Restore Factory Defaults
Click the
Factory Defaults
button to restore the device to the original factory
settings. All configuration will be lost. The PremierWave 2050 module
automatically reboots upon setting back to the defaults.