Lantronix UDS1100 UDS1100 - User Guide - Page 62
Using TFTP: Command Line Interface, Recovering the Firmware Using the Serial Port and DeviceInstaller - firmware upgrade
View all Lantronix UDS1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Figure 10-1. TFTP Window 10: Firmware Upgrades After the firmware has been loaded and stored, which takes approximately 8 seconds to complete, the unit performs a power reset. Using TFTP: Command Line Interface To download new firmware from a computer: 1. Enter the following from a TFTP command line interface: tftp -i put The following examples demonstrate the TFTP command sequence to download the .rom file and the .cob file: tftp -i 192.168.1.111 put uds1100_6802.rom U3 tftp -i 192.168.1.111 put uds1100_webm_1901.cob WEB1 Recovering the Firmware Using the Serial Port and DeviceInstaller If for some reason the firmware is damaged, you can recover the firmware file by using DeviceInstaller to download the *.ROM file over the serial port. To recover firmware: 1. Start DeviceInstaller. If your PC has more than one network adapter, a message displays. Select an adapter and click OK. 2. From the Tools menu, select Advanced/Recover Firmware. The Serial Port Firmware Upgrade window displays. 3. For Port on PC, enter the COM port on the PC that is connected to the serial port of the Lantronix unit. 4. For Device Model, be sure the appropriate device (e.g., UDS1100) displays. 5. For Firmware File, click the Browse button and go to the location where the firmware file resides. UDS1100 User Guide 62